1、Attach the riser tensioners, choke and kill lines to the slip.
將隔水管張力器，壓井及放噴管線連到伸縮節上。

2、What was the most difficult part of the transformation into the advanced early riser for you?
在培養早起習慣的過程中，你遇到的最大的困難是什么呢？

3、The biggest riser was Barcelona, which jumped four places to 31st.
最快的是巴塞羅那，向前躍進了四名，排在第31位。

4、If it did, the pressure of the oil would blow it out of the riser like a cork in a hose.
假如他能實現這一目的，其油壓也會使它脫離立管，如同水龍帶沖飛軟木塞那樣。

5、They may also be placed at far surface of a mold, away from a riser or sprue.
它們也可能被置于遠遠表面的模具，使之遠離，從冒口或澆道。

6、This is being called the Lower Marine Riser Package system.
這個措施被稱為下層海底取油管封裝系統。

7、Pick up the riser tensioner support ring to the diverter housing.
將隔水管張力器支撐環鎖到轉噴器殼體上。

8、Riser pipe: a four-foot-diameter steel pipe called a riser connects the ship to the borehole.
立管：直徑四英尺的鋼管(稱為“立管”)將船和鉆孔連接起來。

9、STUDY OF A VORTEX ROUGH CUTSEPARATION SYSTEM FOR FCC RISER OUTLET
催化裂化提升管末端旋流式快速分離系統的研究

10、At a 1.6-mile depth, the assembled riser weighs 1,000 tons.
在1.6英里的深度，組裝好的立管重1,000噸。

11、The Riser Designing of Steel Castings Based on AutoCAD AME Software
利用 AutoCAD-AME 軟件進行鑄鋼件冒口設計

12、But for me, switching from being a night owl to an early riser has been a godsend.
不過對我來說，從一個夜貓子變成一個早起的人(這是完全可能的)簡直是天賜的。

13、Once I applied those ideas, I was able to become an early riser consistently.
一旦我采用了那些研究中提到的辦法，我就成為了一個可以堅持早起的人了。

14、I am already an early riser although I use an alarm clock to start my day at 4am.
雖然我使用鬧鐘，但是我已經變成了一個在早上四點起床的早起者。

15、At a 1.6-mile depth, the assembled riser weighs 1, 000 tons.
在1.6英里的深度，組裝好的立管重1 000噸。

16、He was an early riser and he would be at the breakfast table at seven.
他習慣早起，七點鐘就坐在桌前用早餐。

17、Application of Kiss and Ear Riser to Al-Bronze Castings of ZQAl 9-4
壓邊澆冒口與耳冒口在ZQAI 9-4鑄件上的應用

18、The Design of Riser in Investment Steel Casting Using Modified Johns Method
采用修正后的Johns法設計熔模鑄鋼件冒口

19、Application of Riser on the High Cr White Cast Iron Liner Plate
壓邊冒口在高鉻白口鑄鐵襯板上的應用

riser翻譯

n. 起床者, 叛徒, 起義者, 豎板【化】 上升管 詳情