1、Application of Geometrically Continuous Catmull-Rom Spline Surface
Catmull-Rom幾何樣條曲面的應用

2、The Numbers are a text spline with an extrude modifier, and then an array over the clock's surface.
數字是用文字樣條線配合擠壓修改器做出來的，然后在鐘表表面進行陣列。

3、The Bezier spline is always anchored at the two end points.
曲線總是錨定在兩個端點。

4、Spline Subdomain Method of Static Force Analysis of Reticulated Shells
網殼結構靜力分析的樣條子域法

5、The thesis simulates the process of the spline forming by the FEM software.
應用有限元分析軟件，對花鍵軸的齒形成形過程進行模擬。

6、Optimization of Cam Contour by B spline Curve
利用三次均勻 * 條曲線優化設計凸輪廓線

7、The processing of cubic spline function of extreme point with infinite derivate;
提出了結合圖像邊緣處理的雙三次樣條函數插值算法。

8、Research on CAD System of Rectangular Spline Hob Design
矩形花鍵滾刀設計CAD系統研究

9、Using spline collocation method to solve plasma tearing mode equations numerically is introduced.
采用樣條配置法數值求解環流器等離子體撕裂模方程。

10、Surface spline is a good alternative to reconstruction surface of arbitrary topology type.
對于任意拓撲曲面重建，曲面樣條是一個比較好的選擇。

11、Analysis of the Thin?walled Boxed Structures?by the Spline Subdomain Method
直箱型結構分析的單樣條子域法

12、Study on B Spline Interpolator in CNC System
數控系統中 * 條插補器的研究

13、Wavelets-Based Multiresolution Representation and Edit of B Spline Curves
基于小波的 * 條曲線多分辨表示及編輯

14、G~2 continuous cubic Bezier rational interpolation spline curve
G~2連續的保凸插值有理三次Bezier樣條曲線的構造

15、EE spline fitting by the data from non-contact measruement of 3-D humanbody
非接觸三維人體測量數據的EE樣條擬合

16、Pitch Point is the intersection of the spline tooth profile with the pitch circle.
節點是鍵齒的齒廓與節圓的交點。

17、Derivation of Spline Element Function of Cable Structure
索結構樣條元插值函數推導

18、I made a simple blueprint setup from these images and started to build a spline cage.
我以這些圖像為基礎制作了一個簡單的藍圖并且開始構建曲線框架。

19、The step matrix of spline function is derived.
文中導出了樣條函數步長矩陣。

20、RESEARCH ON APPLICATION OF SURFACE SPLINE FUNCTION IN DTM
曲面樣條函數在DTM中的分析應用研究

21、B Spline Function and Image Edge Detection
* 條函數與圖像邊緣檢測

22、The first bezier spline is drawn from the first point to the fourth point in the point array.
第一個貝塞爾樣條是從點數組中的第一個點到第四個點繪制成的。

23、The first and each subsequent Bezier spline requires only three points.
第一條和后面的每一條貝塞爾曲線只需要三個點。

24、This paper is concerned with the problem of quartic lacunary polynomial spline interpolation.
本文討論四次缺插值多項式樣條。

25、Upper Bound Analysis of Extrusion of a Spline Shaft
花鍵軸擠壓的上限分析

26、Study on Teeth-modification of Ball Spline Pair by Finite Element Method
滾珠花鍵副輪齒修形的有限元法研究

27、THE APPLICATION OF CUBIC SPLINE IN NC PROGRAMING
三次樣條在數控編程中的應用

28、Interactive Shape Modification of the G~2 Cubic Hermite Spline Curves
G~2三次Hermite樣條曲線形狀的交互修改

29、STATIC ANALYSIS OF STRAIGHT BOX GIRDER BRIDGES BY SPLINE SUBDOMAIN METHOD
雙樣條子域法分析等高度變截面連續直箱梁橋

30、Edge Detection Based on a B Spline Smoothing Formula
基于樣條修勻公式的圖像邊緣檢測

spline翻譯

n. 曲線尺, 齒條, 塞縫片, 花鍵vt. 用花鍵聯接, 開鍵槽【化】 花鍵; 鍵; 鍵槽 詳情