1、MICROSTRUCTURE AND PERFORMANCE OF Ni-Hf BRAZING FILLER ALLOY
Ni-Hf合金釬焊料的顯微組織和釬接作用

2、STUDY ON BRAZING PROCESS AND JOINT STRENGTH OF ALUMINAC CERAMICS
氧化鋁陶瓷釬焊工藝與接頭強度的研究

3、Ti-based amorphous brazing material is a new brazing material with great application prospect.
鈦基非晶態釬焊料是一種較有應用前景的新型釬焊材料。

4、The results obtained have instructive function for brazing technology of gyro housing.
研究結果對陀螺儀殼體的釬焊工藝具有指導意義。

5、The forming mechanism is different in the fusion layer, brazing layer and heat agglomerating layer.
滲鉻層內不同區域的形成機理有較大差別。

6、Apply brazing wire or rod at point where tube enters valve socket.
將銅焊線或銅焊條按在插入閥門承插口的管道線上。

7、Mechanisms of Cracks Forming in Al_2O_3/Kovar Brazing Joint
Al_2O_3/Kovar釬焊接頭裂紋冶金因素分析

8、The superior brazing joint can be obtained by the vacuum brazing.
真空釬焊可得到高質量的釬焊接頭。

9、High power transverse flow CO2 laser was used to scan the brazing alloy and diamond grits.
采用高功率橫流CO2激光掃描釬料合金與金剛石顆粒。

10、When joint is filled, a continuous run of solder or brazing alloy will be visible.
在安裝連接部件時，可以看到焊料和釬焊合金繼續流動。

11、The Procedure for CMT Method MIG Brazing of Aluminium and Galvanized Steel
鋁和鍍鋅鋼CMT法MIG釬焊工藝研究

12、Dynamic analysis of the brazing process is made.
本文對釬焊過程進行了動態分析。

13、Ti-Ag-Cu Active Metal Brazing of AlN Ceramics
AlN陶瓷的Ti-Ag-Cu活性封接工藝

14、Silver Brazing Method: Assemble parts to be brazed.
銀釬焊的方法：對需要進行釬焊的部件進行組裝。

15、The strength of a safety screen is greatly increased by brazing each wire crossing.
在金屬絲的每一個交叉處進行銅焊，可大大增加防護網的強度。

16、The formation mechanism of wide clearance brazing is discussed.
同時探討了大間隙釬料的形成機理。

17、Brazing of copper, copper alloys, silver and molybdenum etc.
釬焊銅及銅合金、銀、鉬等金屬。

18、Active Metal Brazing of Hot-Pressed Si_3N_4 Ceramics
熱壓氮化硅陶瓷的活性金屬釬焊

19、This paper analyses the cause of strength descent of brazing weld, and proposes improving measures.
本文分析了釬焊焊縫強度下降的原因，并提出改進措施。

20、A solder paste used for brazing was developed and its technical performance was investigated.
研制了鋁硬釬焊用釬料膏，對其工藝性能進行了研究。

21、But there are many problems in the process of making brazing diamond film tools.
但在金剛石厚膜釬焊刀具的加工過程中，還存在許多問題。

22、The temperature of the joint should be hot enough to melt the brazing alloy.
連接部位的溫度應該高到能夠融化銅焊合金。

23、DYNAMIC ANALYSIS OF SPECIFIC HEAT DENSITY OF Ar ARC BRAZING ZONE
氬孤釬焊加熱區比熱流分布的動態分析

brazing翻譯