1、So, it doesn't look very tangent because it crosses the surface.
它看上去并不是十分地相切，因為它穿過了曲面。

2、The line connecting the point and the center bisects the included Angle of the two tangent lines.
這一點和圓心的連線平分這兩條切線的夾角。

3、Being perpendicular to the surface means that you are perpendicular to its tangent plane.
垂直于曲面也意味著垂直于它的切平面，垂直于曲面也意味著垂直于它的切平面。

4、But, actually, that is not true because here the circle is tangent to the axis.
但實際上，這是不對的，因為這個圓與這個坐標軸相切。

5、If we were moving on the tangent plane, this would be an actual equality.
如果我們在切平面上移動，這將會是一個真正的等式。

6、The direction is tangent to the trajectory.
方向就是軌道的切線方向。

7、And that line is tangent to the surface.
一條與曲面相切的直線。

8、So, the velocity vector is going to be always tangent to the curve.
速度向量總是與曲線相切的。

9、Another is to intenerate the input vectors by hyperbola tangent function.
二是采用雙曲線正切函數柔化輸入矢量。

10、Going off on a tangent only confuses readers.
寫一篇有主題突出的博文，突然轉移話題只會讓讀者感到迷惑。

11、All satellite image are tangent plane projection obtained along the flight direction of satellite.
衛星圖像都是沿衛星飛行方向而獲取的切平面投影圖像。

12、That's one way to define the tangent plane.
這是定義切平面的方法。

13、SVG can turn an image so it always faces the tangent of the line it is following.
SVG可以使圖像轉向，以便它總是面向它所移動方向的切線。

14、The tangent of the complement of a directed angle or arc.
余切有方向角或弧的補角的正切

15、In this paper base tangent length is put forward and lead angle calculating formula is deduced.
這篇文章提出了公法線長度并推導出超前角的計算公式。

16、OK, and that's going to be the normal vector to the surface or to the tangent plane.
這就是切平面的，或者說這個曲面的法向量。

17、Not really. I feel somewhat like an inverse tangent function that's approached an asymptote.
不太好。感覺像是反正切曲線接近漸近線了。

18、The mesh equations of gears are given by tangent polar coordinate system.
本文給出了切線極坐標下的齒輪嚙合方程式。

19、That is how we get the tangent plane.
這樣我們就得到了切平面。

20、The purely kinematical equation for the tangent vector of a line element is derived.
導出了線元切向量的變形方程以及拉伸軸在極射赤面投影圖上位置變化計算公式。

21、Tangent Stiffness Matrix of Space Cable Element
空間索單元的切線剛度矩陣

22、That also tells us how to find tangent planes to level surfaces.
這其實也告訴我們，怎樣找等值面的切平面。

23、The tan() function returns a number that represents the tangent of an angle
函數的作用是：返回一個數字所對應的正切值。

24、At unstable state the formula of calculating unstable time using tangent Angle is established.
對于失穩的情況，建立了用割線角估算失穩時間的一般公式。

25、The tangent of the complement of a directed angle or arc
余切有方向角或弧的補角的正切

26、A digressive allusion to the day of the week; a tangent ial remark.
附帶提及那個星期的那一天；附帶評論。

27、The atanh() function returns the inverse hyperbolic tangent of an angle.
函數的作用是：返回一個指定角度參數所對應的反雙曲正切值。

28、Then, if I choose any vector in that tangent plane.
那么如果我選擇了任何位于切平面的向量。

29、It's going to be tangent to the level surface, right?
它是與等值面相切的，對不對？

tangent翻譯

a. 接觸的, 正切的, 離題的n. 切線, 正切【電】 正切相關詞組: go off at a tangent 詳情