1、The reason of 7475 alloy flat ingot crackle and loose combination are analysed.
分析了7475鋁合金扁錠裂紋、疏松傾向大的原因。

2、The ingot alloy quality and casting process influence directly the casting metallurgy quality.
精鑄合金錠的質量及鑄件鑄造工藝直接影響鑄件冶金質量。

3、Design of Chain Cleaning Machine for Steel Ingot Model
鏈條式鋼錠模清理機的設計

4、The rack of aluminum ingot stacker plays an important part in the process of stacker.
在堆垛的過程中，鋁錠堆垛機的機架起著重要的作用。

5、IMPROVEMENT IN DESIGN OF 9-INCH DUAL PURPOSE INGOT MOULD AND PRACTICE
9?劑接酶侄?５納杓聘慕?朧導

6、A steel mill's ingot goes into a sedan or a skyscraper, but not both.
煉鋼爐煉出的鋼材可能用來造小轎車或者摩天大樓，但不可能一塊鋼材兩個都造。

7、Heating chamber is pivotal part of the polycrystalline silicon ingot production furnace.
前言：加熱室是多晶硅鑄錠爐的關鍵部件之一。

8、Also, the shape of the dumpling is like gold ingot from ancient China.
同時， ，面團布丁的形狀像來自遠古的中國的金色的錠。

9、The ingot annealing technology in some alloying steel plant have been investigated.
調查分析了一些特殊鋼廠的鋼錠退火工藝規范。

10、As it was melting away I hurried off to finish welding a large ingot mold from heavy Angle iron.
由于這是融化我跑去找完成沉重的角鐵焊大型鋼錠模。

11、ROLLING OF ANGLES BY USING 5.6t INGOT ON THE BLOOMING MILL
初軋用5.6t錠軋制角鋼

12、His master granted him a small ingot of silver.
主人賞給他一錠銀子。

13、Wooden club ingot son: also ingot son, fritters, is a kind of Fried foods.
棒槌錁子：鎩又稱大錁子、油條，是一種油炸食品。

14、A small ingot of nonferrous metal.
小型的非金屬鑄塊

15、The procedure of thermit welding for repair of the ingot die is presented in the paper.
介紹了鋁熱焊修復鋼錠模的工藝過程。

16、Tin Ingot Tin Ingot trademarks of the London Metal Exchange registration.
錫錠tinIngot商標在倫敦金屬交易所(LME)注冊。

17、Simulation Analysis of Steel Ingot Stress Field in ESC
電渣熔鑄鋼錠應力場的模擬研究

18、STUDY ON THE DETERMINATION OF IMPURITIES IN ANTIMONY INGOT BY ICP-OES
銻錠中雜質元素的ICP-OES法測定方法研究

19、Thus a high quality ingot with good surface finis. is. produced.
這樣具有良好表面光潔度的高質量鋼錠就生產出來了。

20、Development of 3-PTT parallel Machine Tool for steel Ingot Deseaming
3-PTT滑塊式并聯鋼錠修磨機床的開發

21、His master granted him a small ingot of silver
主人賞給他一錠銀子。

22、Jiaozi is oblate, similar in design to a shoe-shaped gold or silver ingot in ancient times.
餃子是扁圓的，它設計到類似于古代的一個形似金或銀的錠子。

23、This paper describes the shape of truncated pyramid bottom ingot and its effect on slab yield.
本文簡述了凸底錠形狀及凸底對提高板坯收得率所起的作用。

24、A small ingot of nonferrous metal
小型的非金屬鑄塊

25、We purchase aluminium ingot from one of the top ten aluminium manufacturers in China.
我們購買來自中國的前十名鋁制造業者之一的鋁錠。

26、The Production Test and Study On Medium—Manganese Cast Iron Ingot Mould
中錳鑄鐵鋼錠模生產試驗與研究

27、Analysis on Control of Ai and Ti Content in ESR Ingot of GH3030
GH3030合金電渣重熔Al、Ti成分控制分析

28、Keeping pouring quality would prevent the ingot steel from forging bursting.
為避免此類缺陷產生，必須保證鋼錠的澆注質量。

29、Ingot defects may be broadly classified into internal flaws and surface flaws.
鋼錠缺陷廣義上可分為內部缺陷和表面缺陷。

ingot翻譯

n. 錠, 鑄塊【化】 坯料【經】 錠, 鑄模, 鑄塊 詳情