1、The theoretical analysis research of spiral bevel gear lapping with dynamic force is carried out.
該研究是國內首次對螺旋錐齒輪動態力研齒進行的理論分析研究。

2、The drive advantages and technologic advantages of plastic bevel gear were analyzed.
分析了塑料斜齒輪的傳動優點和工藝特點。

3、Spur gear or compound bevel gear attachments can be provided in any position shown in Figure 1.
如果采用正齒輪(SGA)或復合傘齒輪(BGA)附件，則可以在圖1中顯示的各個位置安裝手輪。

4、P/M BEVEL GEAR IN 40kN JACK USED FOR CAR
轎車用40kN千斤頂粉末冶金圓錐齒輪

5、When ordering bevel gear actuators, specify mounting position as second line information.
如果是訂購錐齒輪執行器，請在第二行增加安裝位置信息。

6、All valves can be furnished with handwheels, chainwheels and bevel gear handwheels and chainwheels.
所有閥門都可以配置手輪、鏈輪和錐齒輪手輪和鏈輪。

7、Studied on and designed the pneumatic system for the spiral bevel gear burnishing machine.
該氣動在國內是首次研究應用于數控螺旋錐齒輪研齒機。

8、The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.
給出了斜航式法向圓弧螺旋錐齒輪的參數化建模方法。

9、Paint the tooth flank of the big bevel gear with a thin and equal red lead coat.
即在大錐齒輪的齒面上涂一層薄而均勻的紅鉛油，然后轉動齒輪數圈。

bevel gear翻譯