1、Developing Driver for Motion Control Card on Linux Platform
基于Linux平臺的運動控制卡驅動程序開發

2、The control card may indicate that the program is on the master system tape or on CARDS.
控制卡可以指出程序是在主系統帶上還是其他卡片上。

3、Study of CAMAC box control card based on PCI bus
基于PCI總線的CAMAC機箱控制卡的研制

4、The design of step motor control card is based on DSP technique and PCI bus technique.
步進電機控制卡的設計采用了DSP技術和高速pci總線技術。

5、GPIB is applied widely in modern instrument, while it's control card is expensive.
GPIB接口作為現代儀器的標準接口，已廣泛應用，但通常的控制卡較為昂貴。

6、The hardware of system uses a PC and a DSP motion control card which complete motion Control.
系統在硬件上通過一臺工業計算機，一塊DSP運動控制卡來實現機器人的運動控制；

7、A design of the open motion control system based on PC and motor control card was presented.
提出一種基于PC和運動控制卡的開放式運動控制系統的設計方案。

control card翻譯