1、We can provide flange connection of various standards.
可提供各種標準的法蘭連接。

2、Retighten all flange bolts in a star pattern in order to extrude rubber sleeve flange material.
為了將橡膠套管法蘭擠出來，需要按照星形模式重新緊固所有法蘭螺栓。

3、The urethane liner extends over the flange face to serve as the valve's flange gasket.
這種氨基甲酸乙酯延展覆蓋到法蘭表面，起到閥門法蘭襯墊的作用。

4、Another, flange supplying the various pipeline accessory, if elbow etc.
另供應各種管道配件，如彎頭、法蘭等。

5、Replacement sleeves are made with one flange end slightly softer than the other.
用來更換的套管其一端的法蘭比另一端稍微柔軟一些。

6、MAXON's A Style Synchro flow control valve bodies are designed to meet ANSI flange specifications.
MAXON的A型同步流量控制閥閥體的設計滿足ANSI的法蘭規格要求。

7、Flange form different requirements, the use of gasket are different.
法蘭形式不同，要求使用的墊片也不同。

8、Tube flange CAD can improve the efficiency of designer and quality of design work in practice.
實踐證明，管法蘭CAD大大提高了設計人員的工作效率和設計質量。

9、Allow the sleeve flange to return to its original position.
允許套管法蘭回到它的初始位置。

10、The top flange type allows for space-saving and direct installation into the fixture body.
前法蘭式允許進入夾具機構，節省空間和直接安裝。

11、Limited distance deviation of the optional bolt hole on flange shall be 2mm.
法蘭上非強制螺栓孔的有限距離偏差應該為2毫米。

12、A flange which contains insulating material to separate the metal parts.
帶有絕緣材料的法蘭，用來分開金屬部件。

13、Remove cover and clean flange and reseal.
拆卸車軸護罩，清潔凸緣并重新密封。

14、Some fittings and equipment have built-flange, flange connection also belongs.
有的管件和器材已經自帶法蘭盤，也是屬于法蘭連接。

15、2 Disconnect the gauge glasses or fit a blind flange between them.
拆開水位玻璃管或者在兩者之間裝上蓋板.

16、A optoelectronic image detecting method of wheel set flange wear is researched.
提出用光電圖像方法非接觸檢測車輛輪對的輪緣磨耗。

17、Experiment on Welded Flange Plate (WFP) Reinforced Conneciion
鋼結構焊接翼緣板加強式梁柱剛性連接的試驗研究

18、Joint type of this valve is flange joint.
本閥連接方式為法蘭連接。

19、The rotationally symmetrical flange facilitates mounting.
這個旋轉對稱便于安裝。

20、Install upper barrel, fixed by break flange and bolt nut.
安裝上體，用斷開法蘭和螺栓螺母固定。

21、Refer to Table1 for flange classifications and serial parameters.
法蘭分類及系列參數見表1的規定。

22、The bushing ring flange suitable temperature is decided by the designer according to the situation.
襯環法蘭的適用溫度由設計者根據情況決定。

23、The gear reducer is aligned based on 4 mark lines on sides of bottom flange and bedplate marks.
減速機以底面法蘭側面的四條刻線對準臺板劃線進行找正。

24、Application of DJND wheel flange treads in DF_5 locomotives
DJND型輪緣踏面在東風_5型機車上的應用

25、Also as in large office gate switch sides, are equipped with flange is easy to replace them switch.
另外如在大的閘閥開關處兩邊，都設有法蘭盤，就是為了拆換開關方便。

26、The large anticorrosion flange can be divided into pushing, pressing, forging, casting and so on.
大型防腐法蘭以制作方法劃分可分為推制、壓制、鍛制、鑄造等。

27、Do not rely on the flange bolting to support the valve or connecting pipeline.
不能依賴法蘭螺栓來支撐閥門或連接管道。

28、Cast Iron Pipe Flanges and Flanges Fittings, 125 LBS. Conforms to related flange drilling.
鑄鐵管道法蘭和法蘭連接件，125磅，符合相關法蘭鉆孔尺寸標準。

29、The Improved Design Proposal of the Flange Adaptor Injection Mold
法蘭注塑模設計方案的改進

30、Flange hole inside the tube must be chamfered hole welding.
法蘭內孔管件內孔必須倒角焊接。

flange翻譯

n. 邊緣, 輪緣, 凸緣vt. 裝凸緣【化】 法蘭; 凸緣【醫】 翼 詳情