1、A process for printing from a smooth surface, as lithography or offset.
平版印刷術一種平面印刷的方法，如平版印刷術或膠印

2、Durable, white, water - resistant, low shrinkage resin for stereo lithography for SLA system.
應用于立體光刻技術的耐久性，白色，防水和低收縮的樹脂。

3、Lithography - The process used to transfer patterns onto wafers.
光刻-從掩膜到圓片轉移的過程。

4、The electron beam lithography and its improvement are introduced also.
同時還介紹了電子束光刻技術及其改進。

5、Electron - beam lithography with a novel multilevel resist structure defines the pattern.
采用新型的多層抗蝕劑結構的電子束光刻來形成圖形。

6、SOFTWARE DEVELOPMENT FOR EBES-40A ELECTRON BEAM LITHOGRAPHY SYSTEM
EBES-40A型電子束曝光機的軟件開發

7、0.2μm or Less i-Line Lithography by Phase-Shifting-Mask Technology
采用移相掩模技術實現≤0.2μmi線光刻

8、The new set of models are more proper for lithography simulation for thick SU-8 resist.
對于厚su - 8膠的模擬，這種模型比普通的模擬模型更加合適。

9、Mechanical Lithography by Scanning Probe and the New Technology of DPN
掃描探針機械刻蝕及DPN新技術

10、APPLICATON OF LaB_6 CATHODE IN ELECTRON BEAM LITHOGRAPHY SYSTEMS
LaB_6陰極在電子束曝光機中的應用研究

11、In this article, deep submicron lithography and nano processing are reviewed.
本文綜述了深亞微米光刻和納米光刻技術。

12、A process for printing from a smooth surface, as lithography or offset
平版印刷術一種平面印刷的方法，如平版印刷術或膠印

13、The atomic lithography experiments were carried out by use of a metastable neon atomic beam.
用亞穩態氖原子束進行了原子光刻實驗。

14、Individual sodium titanate nanowire-based device is fabricated via e-beam lithography techniques.
利用電子束光刻技術制作了基于鈦酸鈉納米線的納米器件。

15、The high speed Patten Generator is designed for nanometer E-beam lithography system.
為滿足納米級電子束曝光系統的要求，設計了高速圖形發生器。

16、Therefore, the technology of EUVL is becoming a hot point in international lithography field.
因而，該技術也是目前國際上先進光刻領域研究的熱點。

17、Experimental results of deep submicron lithography with a excimer laser are reported in this paper.
報道用遠紫外準分子激光進行亞微米光刻的實驗結果。

18、Composition rich in imaginative design, lithography wonderful way abnormal.
設計構圖想象力豐富，刻制手法異常奇妙。

19、The sensor is fabricated by traditional lithography and etching.
制作采用的是傳統的光刻、刻蝕工藝。

20、Lithography % - The process used to transfer patterns onto wafers.
光刻-從掩膜到圓片轉移的過程。

lithography翻譯