1、Micro cycle design ensured the concurrent integration of CAD, DFM and CAPP.
通過細化設計循環，保證了CAD，DFM和CAPP的并行集成；

2、I developed several professional interests, like History and Micro Economics at my spare time.
我有很多個人愛好，空閑的時間我研究歷史和微觀經濟學。

3、Economic data was soft early in the week though micro news for oil continued to be bullish.
本周早期經濟數據疲軟，但宏觀層面的消息繼續看漲石油。

4、HOT DUCTILITY OF VANADIUM MICRO ALLOY STEEL CC SLAB
含釩微合金鋼連鑄坯高溫塑性的研究

5、We identified a liquid submersion sensor in the Pre, visible through the micro USB port.
我們在Pre內發現了一個液體潛水傳感器，通過microUSB接口可見。

6、Thi innovative alaram clock is composed by a micro vibration device and a micro-chip.
這款新穎的鬧鐘由微振動裝置和微型芯片組成。

7、The scissor blades are stainless steel and cut very clean with a micro edge.
剪刀刀身是不銹鋼質的并且能夠用它鋒利的刀刃剪得非常干凈。

8、Study on Proton Exchange Membranes and Micro Fuel Cells Based on MEMS
質子交換膜與MEMS微型燃料電池的研究

9、Micro Resonance Raman Spectroscopy of Cytochrome bc 1 Complex Crystals
細胞色素bc_1復合物結晶的顯微共振拉曼光譜

10、Therefore, extracting flavonoid by micro wave from mulberry leaves is an efficient method.
因此，微波法是一種提取桑葉黃酮的有效方法。

11、The connection of different types of micro sources to form a MicroGrid is an important task.
如何連接多種不同類型的分布式電源形成微網是微網必須解決的問題。

12、This mechanism can be replaced by micro actuators or other control strategies in the future.
在將來，這個機械裝置也許會被其他微執行器或者控制策略代替。

13、R&D of Conn-rod of High-strength Micro Alloyed
高強度非調質鋼連桿的研制

14、DETECTION OF MICRO ELEMENTS IN THE INK OF CUTTLEFISH BY ICP AES
ICP-AES法測定烏賊墨中的微量元素

15、(iii) Application of MEA in micro PEMFC based on PCB technology.
(3)MEA在基于PCB技術的微型PEM燃料電池中的應用。

16、The method on profile - control of micro - optic element in photoresist was presented.
介紹了連續微光學元件在光刻膠上的面形控制方法。

17、This time he has just finished in pen distance, micro plastic injection of double chin to removed.
這次他有剛剛在鵬程做完了注射微整形，將自己的雙下巴給去除了。

18、A flexural oscillation model about V-shaped silicon electro-thermal micro actuator is presented.
提出了V型電熱硅微致動器的彎曲振動力學模型。

19、The main special machine tools and equipment for micro EDM are introduced as well.
扼要介紹了國外主要的微細電火花專用機床與設備。

20、The Prospect of Micro - motor using Nanotechnology
納米技術微電機展望

21、It was controled by a TRS-80 micro computer
該系統由TRS-80型微機進行控制

22、Aerodynamics Research on Micro Air Vehicles
微型飛行器空氣動力學研究

23、The polishing agents have minimal cut and finish without any micro marring or dullness.
拋光劑的最小割和完成翻沒有任何微型或沉悶。

24、A new micro ECM set-up is developed independently by the author
本文作者獨立研制了一種新型、實用的微細電解加工裝備。

25、Home Application: White Goods, Small Appliance, Micro Fanner.
家用電器：白色家電，小家電，微型電風扇。

26、Micro EDM Technology Based on Equivalent Machining Area of Shaped Holes
基于異形孔等效放電面積的微細電火花加工技術

27、The effect of micro structure, morphology on strength and plasticity has been diss.
同時討論了顯微組織及其形態對強塑性的影響。

28、Development of micro EDM using direct drive multi-electrodes
多電極直接驅動的微細電火花加工技術

29、The micro lipoid contents in the wheat are additional factors to determine the wheat quality.
小麥中所含的微量脂類是小麥品質決定因素的補充因素。

30、A STUDY ON MACHINING INVOLUTE MICROGEARS BY MICRO EDM TECHNIQUE
微細EDM技術加工微齒輪的研究

micro翻譯