1、The roughness of the interior was important and needed here.
內政部粗糙度是重要的，這里需要。

2、Design and roughness analysis of trapeziform grating in DVD optical head
DVD光學頭中的梯形光柵設計和表面粗糙度分析

3、For a good bond, an adhesive must counteract the effect of surface roughness and boundary layers.
為了取得很好的粘結，粘結劑必須能克服表面粗糙和邊界層的反應。

4、Recent development of the joint roughness coefficient (JRC)
巖體結構面粗糙度系數JRC的研究現狀

5、Surface roughness codes and their labeling.
表面粗糙度的代號及其標注。

6、Effects of roughness on tidal bore
摩阻對涌潮的影響

7、Stochastic Modeling of Roughness on Alluvial River Bed
沖積河床糙率模擬問題的探討

8、She rested her cheek against the roughness of his jacket.
她把臉靠在了他粗糙的夾克上。

9、Research for Automatic Marking Surface Roughness Based on AutoCAD
AutoCAD環境下表面粗糙度的自動標注

10、Reserch on the Measurement Technology of Line Edge Roughness by AFM
基于AFM的刻線邊緣粗糙度測量技術研究

11、Trail Investigation on Surface Roughness of Bright Surface and DI Tinplate
光亮表面鍍錫板及DI材的表面粗糙度試驗研究

12、Our Views on the Surface Roughness of Spinning Cots
紡紗膠輥表面粗糙度初探

13、Experimental Study on Surface Roughness of HSM Hardened Steel
高速銑削淬硬鋼表面粗糙度的試驗研究

14、My hair used to be sear, roughness and hard to tease.
以前我的頭發干枯、粗糙，難以梳理。

15、But when its power failed, Japan's greatest and most roughness warlord no longer be contained.
但當它瓦解，日本有史以來最強大也是最粗暴的軍閥統治隨之不復存在了。

16、The image fractal dimension feature describes the complexity and the roughness of texture.
圖像的分?jǐn)?shù)維特征描述了紋理的復雜度和粗糙度。

17、But you will not mind the roughness nor the steepness of the way.
你不會介意路途的不平或艱險。

18、The effect of surface roughness on nitriding surface quality is also studied in this paper.
另外，也對表面粗糙度，氮化表面質量的影響作了探討。

19、Aerodynamic roughness length is a important feature to easement soil resistance to wind erosion.
耕作土壤表面空氣動力學粗糙度是評價土壤可蝕性的重要指標。

20、having a surface free from roughness or bumps or ridges or irregularities.
具有無粗糙、無顛簸、無規則部分的表面或無突起的表面的。

21、Calculation of the Ideal Surface Roughness Cut by Cutter with Round edge
圓弧刃刀具切削時理論粗糙度的計算

22、Some Skills to Mark Surface Roughness in AutoCAD System
AutoCAD系統中標注表面粗糙度代號的技巧

23、Effect of Surface Roughness of Carbon Black on Reinforcement in Rubber
炭黑表面粗糙度對橡膠補強作用的影響

24、The part error with RPT is classified as dimension error, shaped error and roughness of surface.
快速成型制件的的誤差分為尺寸誤差、形狀誤差和表面粗糙度。

25、Only in surface roughness of the finishing time is important.
表面粗糙度只有在精加工的時候才是重要。

26、Studies on Influences of Vegetation on Aerodynamic Roughness Length
植被條件對下墊面空氣動力學粗糙度影響實驗研究

27、One key of road roughness recognition was feature extrication.
路面不平度識別的關鍵之一是特征提取。

28、Effect of Surface Roughness on the Adhesion of Microstructures
表面粗糙度對于微結構粘附的影響分析

29、Left - Color map, Middle - Normal map, Right - Roughness map.
左——顏色貼圖；中——法線貼圖；右——粗糙度貼圖。

30、The roughness of the world.He guards the sleep of his pauper master as if he.
手心；它舔舐無情的世界帶給你的創傷和痛苦。它守護著乞丐主人入睡，仿佛他是王子。

roughness翻譯

n. 粗糙, 凹凸不平, 粗糙度, 篷亂毛發【化】 粗糙度; 不平度 詳情