1、The slide block is synchronized with anti torsion bar and mechanical block mechanism. ;
滑塊同步采用抗扭連桿和機械擋塊機構；

2、Change Feature of Torsion Angles in Conformation Transition on DNA B to Z
DNAB→Z構象轉換的扭轉角變化特征

3、How they let the beast tore torsion even Shiyao in themselves do not leave scars of the?
他們是怎樣讓野獸的撕撓甚至噬咬在自己身上不留疤痕的呢？

4、Note:the spring quantity is the number of the cylinder and output torsion is the general torsion.
注：彈簧數量為氣缸一端的數量，輸出扭矩為總扭矩。

5、Introduces the transfer matrix method for torsion of circular shaft.
介紹了圓軸扭轉時的傳遞矩陣法。

6、Design of anti-side-rolling torsion pole for rail vehicles
軌道車輛抗側滾扭桿裝置的設計

7、A torsion bar is used in a high load capacity truck
扭力桿用于高承載量的卡車。

8、Two sources of torsion are studied macroscopic rotation and aligned spin.
撓率的兩個源被研究—宏觀轉動和排列自旋。

9、Story of the Torsion Pendulum──a Simple Device with Important Uses
扭擺的故事──簡單的儀器與重要的成果

10、Axial loading test and torsion test were made. The stress-strain relation of the GSPS was observed.
對試件進行軸向和彎曲扭轉加載測試，觀察GSPS的應力、應變關系特點。

11、Then the torsion bar spring according to the optimal match is design.
再由最優匹配剛度值設計出相應剛度的扭桿彈簧。

12、Tool marks for the torsion tool are found on the edges of the padlock.
在鎖體的邊緣發現扭力工具留下的印跡。

13、OPTIMUM DESIGN OF AUTOMOTIVE SUSPENSION AND TORSION BAR SPRING
汽車扭桿懸架及扭桿彈簧的優化設計

14、The discovery well was drilled in 1927 on the basis of magnetic and torsion - balance surveys.
其發現井是1927年根據磁力和扭稱測量結果而鉆探的。

15、Direction of movement and hose axis muse lie in one plane to avoid torsion stress.
說明：運動方向與軟管軸線應在同一平面內，以避免產生扭曲損壞。

16、Some other types of torsion spring clutch are also described.
這里還介紹了扭簧式離合器的其他形式。

17、torsion and bending of cylindrical bar
柱體扭轉和彎曲

18、The fatigue failure has been considered as torsion bar spring are subject to periodic forces.
由于扭桿受到的是循環應力，因此設計時考慮了疲勞失效問題；

19、Sometimes, however, the ability of bars to deform appreciably in torsion is put to good use.
但是，有時要利用桿件在扭轉時具有可觀變形的能力。

20、The optimal design of diameter for torsion bar
扭力桿直徑的優化設計

21、designed to measure small forces by the torsion they exert on a thin wire
通過在細絲上施加壓力的轉矩測量小的力量的裝置。

22、Primary omental torsion is a rare cause of acute abdomen in children
摘要原發性網膜扭轉是兒童急性腹痛的一個罕見病因。

23、Nonlinear inertia term coupled with the displacement of torsion is concerned.
方程中考慮了與變形相耦合的非線性慣性項。

24、This machine is applied to test torsion of springs, and measure torque and rotor Angle of springs.
本試驗機用于對彈簧作扭轉試驗，測定彈簧的扭矩和轉角。

25、DEVELOPMENT OF FATIGUE LOAD SPECTRA FOR TORSION BAR SPRINGS OF VEHICLES
車輛扭桿彈簧疲勞載荷譜的編制

26、A Precise Torsion Testing Instrument Based on a Single Chip Micr-computer
單片機控制的扭矩測試儀

27、Mechanical stop and steel torsion bar to maintain synchronization and high precision.
機械擋塊，扭軸同步，精度高。

28、APEX pin, a pin for joining the two sections of the torsion link on the landing gear.
頂銷，用于連接起落架扭力臂兩部份的銷子。

29、He used a very sensitive torsion balance.
他利用了一架非常靈敏的扭力天平。

30、The ATB bridge stops torsion completely due to basic "mechanical-laws".
抗扭橋的抗扭機能借助機械原理讓拍子的抗扭力達到極致。

torsion翻譯

n. 扭轉, 轉矩【化】 扭轉【醫】 扭轉, 捩轉 詳情