1、This call either returns zero on success or a non-zero error code on failure.
函數調用成功時返回零，失敗時返回非零的錯誤代碼。

2、Anything multiplying by "1" can be simplified down to the non-zero operand.
任何乘以“1”的運算數都可以被簡化成非零運算數。

3、Non-zero = The decimal NoteID in the cache of item is being mapped.
非零 =映射項目緩存中的十進制NoteID。

4、The single trivial difference is that you need a non-zero port number to open the server.
惟一的區別在于需要用一個非0的端口號來打開服務器。

5、Anything adding "0" can be simplified down to the non-zero operand.
任何加上“0”的運算數都可以被簡化成非零運算數。

6、Run a command only if another command returns a non-zero exit status.
僅當另一個命令返回非零退出狀態時才運行某個命令。

7、The stack size should be a non-zero multiple of 4 KB and a minimum of 8 KB.
棧大小應該是4KB的非零整數倍，最小為 8 KB。

8、One of them returns 0; the other, a non-zero value.
其中一個返回0；另一個返回一個非零值。

9、The result register will be non-zero if the previous test for zero was true.
如果之前是否為零的測試的結果為真，那么結果寄存器將是非0(為真，所有位均被置1)。

10、Serial number: A unique 32-bit non-zero positive number.
序號（Serialnumber）：一個惟一的32 位非零正數。

11、This function suspends the calling thread until the semaphore has a non-zero count.
這個函數會掛起調用線程，直到這個信號量有一個非空計數為止。

12、The return value is zero for a successful parse, and non-zero otherwise.
返回值為零，說明是一次成功的解析，否則返回的是非零值。