1、In default of experienced hands, count the few of us among the number.
如果沒有熟手，就把我們幾個也算進去吧。

2、Then change your default gateway and hit the enter key twice.
然后，修改默認網關并按回車鍵兩次(見清單14)。

3、All operating system and messages with default values are enabled.
用默認值(events4 . nsf)啟用所有操作系統和消息。

4、Provide default values if applicable.
如果適用，提供缺省值。

5、The default build options, even on 64-bit POWER systems, are for old-style 32-bit applications.
即使在64位的POWER系統上，默認編譯選項也都是為舊式32位應用程序而設計的。

6、For some reason, they stopped including this file by opting for a default implementation.
出于某些原因，它們停止包含這個文件，而選擇使用默認實現。

7、Open this file and observe the default values for port numbers and other parameters.
打開此文件并觀察端口號和其他參數的缺省值。

8、Leave the rest of the options at their default Settings and click OK.
保留其他選項的默認值并單擊ok。

9、The Crux and Bluecurve themes, in addition to the default theme, are supported.
除了缺省主題之外，還支持Crux和Bluecurve主題。

10、The default timeout is five minutes.
默認的超時是5分鐘。

11、If your EA has a default slippage value of 3, guess what your typical slippage will be 4.
如果您的EA已經默認滑點為3，估計你遇到的典型的滑點將是4。

12、The Hardware default detector is shown in Figure 2.
硬件缺省檢測程序如圖 2 中所示。

13、Delete your default router's IP address: # route delete theipadress.
刪除默認路由器的IP地址：#routedeletetheipadress。

14、The somewhat wordy default output of unittest.TextTestRunner.
稍微有些長的 unittest.TextTestRunner()的默認輸出被定向到 StringIO out --如果您想查看它，歡迎您到 out.getvalue() 去查找。

15、Now, ominously, some creditors would like to see the European parent default as well.
當前，很不幸，一些債權人寧愿看到歐洲的母公司也出問題。

16、The default error page will be displayed whenever an unhandled exception occurs.
一旦出現未處理的異常，就顯示該缺省的錯誤頁面。

17、B. the default gateway is the broadcast address for this subnet.
默認網關是該子網的廣播地址。

18、Default delimiter is a vertical bar.
默認的分隔符是豎線(|)。

19、Here, a default block size is assumed.
這里假設使用默認塊大小。

20、Listing 13. Changes in default parameters for minservers and maxservers.
清單13.minservers和maxservers的缺省參數中的更改。

21、The default is a 3-button sequence at a rather slow pace.
默認的設置是由 3 個按鈕組成的序列，而且亮燈速度非常緩慢。

22、The default is to come up read-only -- very nice for a system that you may want to unplug a lot.
缺省情況為只讀 — 這對于您可能希望經常拔下設備的系統來說是再好不過了。

23、JBoss, an open source application server, by default is configured with the Hypersonic database.
JBoss是一個開源應用服務器，在默認情況下，使用Hypersonic數據庫來配置它。

24、A grandnephew is almost the same as a grandson; in default of a lawyer one takes a lancer.
侄孫和外孫，區別不大，丟了個律師，來個長矛兵。

25、The auto loan industry recently is experiencing an increasing default rate, which is almost 50%.
汽車貸款行業最近經歷了不斷升高的違約率，現在已經是50%了，百分之五十，想想！

26、In the next window, keep the Complete String default option and then next.
在接下來的窗口中，保留CompleteString的缺省選項，然后單擊Next。

27、In the default Settings or Application Settings,.net has choices for line and function modes.
在默認設置或Application設置中，. NET擁有對行和函數模式的選擇。

28、Maps the specified URL route and sets default route values.
映射指定的URL路由并設置默認路由值。

29、Association columns default to using method-based sorting.
關聯字段默認采用基于方法的排序。

default翻譯

n. 違約, 不履行責任, 缺席, 默認值vt. 疏怠職責, 缺席, 拖欠, 默認vi. 疏怠職責, 缺席, 拖欠, 默認【計】 默認; 默認值; 缺省值【經】 違約, 債務不履行, 拖欠相關詞組: 詳情