1、The existing bimetal composite processes mainly are of cast-in casting, cast cladding and welding.
目前的雙金屬復合工藝主要是鑲鑄、包覆鑄造以及焊接。

2、Ni/Fe and Cu/Fe bimetal were used to dechlorinate tetrachloroethene.
選用鎳/鐵和銅/鐵雙金屬對四氯乙烯（PCE）進行脫氯試驗 。

3、At the preset temperature level the bimetal element is switching.
在預設的溫度水平，雙金屬元件進行切換。

4、The surface cracks of the bimetal strip sawblade was investigated in the paper.
對雙金屬帶鋸條表面裂紋的形成原因進行了分析。

5、But bimetal casting hammer head solved all the problems of the medium and small hammer heads.
雙金屬澆注錘頭解決了中小型錘頭不耐磨，雙金屬?gòu)?fù)合容易脫落等現象。

6、The cup and cone-shaped fractures often occur when a high strength bimetal composite wire is drawn.
在高強度雙金屬?gòu)?fù)合導線的拉拔過程中，往往產生杯錐狀斷口的斷裂形貌。

7、Preparation of bimetal composite of ZAS35 zinc alloy/carbon steel
ZAS35鋅合金/碳鋼層狀復合材料的制備

8、Application of Borax for bimetal Casting
四硼酸鈉在雙金屬鑄造中的應用

9、The CAD system for the drawing of the bimetal sheet was introduced and an example was also given.
本文介紹了自行研制的雙金屬板材拉延成形的CAD系統，并給出了設計實例。

10、The invention relates to a bimetal liquid-liquid composite packer and a production method thereof.
本發明涉及一種雙金屬液-液復合搗鎬及其制造方法。

11、Three typical AlSi bimetal driving membrane structures are analyzed in this paper.
對三種典型的鋁硅雙金屬驅動膜片結構進行了有限元分析。

12、Test and Study on Bimetal Disc Brake
雙金屬盤式制動器的試制與研究

13、The liquid phase sintering process of steel based carbide - iron bimetal composite was researched.
研究了液相燒結鋼結硬質合金-鐵雙層復合材料的生產工藝。

14、The bimetal element is the simplest and most often encountered sensor.
雙金屬元件是一種最簡單和最常見的傳感器。

bimetal翻譯