1、Remember that the main gusset is slightly shortened to accommodate the cross-member gusset.
記住，主要扣板略有縮短，以滿足跨成員扣板。

2、Next, inspect the gusset for warpage and straighten as needed.
下一步，檢查和整頓的翹曲扣板根據需要的一面。

3、Wide variety of bar gusset plate can be installed on a keel on the changes in width can be formed.
多種板寬條型扣板可同時安裝在一根龍骨上，可形成寬窄變化。

4、Single zip gusset for expandability.
為擴展拉鏈。

5、For the 90 degree Cross-member Trike Design, the Gusset is extended by an inch as shown.
對于90度交叉成員三輪車的設計，該折是延長1英寸的顯示。

6、Smallpox of abnormity strip aluminous gusset plate.
異形長條鋁扣板天花。

7、Check the gusset to insure proper alignment.
檢查扣板，以保證適當的調整。

8、This Gusset is used for all Thunderbolt variations.
變化，這折是用于所有迅雷。

9、The gusset plate calculation of boiler steel structure is very important during the designation.
鍋爐鋼結構連接計算是設計中非常重要的一個階段。

10、Three structures have exhibited cracking at the ends of flange gusset plates.
已有三個結構在翼緣節點板端部出現了裂紋。

11、Weld the cross-member gusset as shown in the drawings below.
焊縫交叉成員扣板如下圖所示。

12、Weld the main gusset as shown in the drawing above.
焊接主要扣板如上所示在提請大會。

gusset翻譯