1、Add Inner Glow and Bevel and Emboss.
添加內發光和斜面和浮雕。

2、Spur gear or compound bevel gear attachments can be provided in any position shown in Figure 1.
如果采用正齒輪(SGA)或復合傘齒輪(BGA)附件，則可以在圖1中顯示的各個位置安裝手輪。

3、The teeth on bevel gears can be straight, spiral or hypoid.
錐齒輪的齒可以是直齒、螺旋形或準雙曲面。

4、The bevel of that picture frame was damaged.
那個鏡框的斜角已被損壞了。

5、Studied on and designed the pneumatic system for the spiral bevel gear burnishing machine.
該氣動在國內是首次研究應用于數控螺旋錐齒輪研齒機。

6、You will also learn about the use of the Taper object, Fillet option and Bevel function.
您還將了解錐度對象、圓角選項和斜角功能的使用。

7、A METHOD FOR DESIGN OF SMALL BEVEL NOZZLE OF ROCKET ENG INES
火箭發動機小斜切角噴管的設計方法

8、We need to apply the following Bevel and Emboss style to get there.
我們需要應用“斜面和浮雕”樣式獲取更好的效果。

9、The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.
給出了斜航式法向圓弧螺旋錐齒輪的參數化建模方法。

10、Use the image below for the values of the Bevel and Emboss.
用這個底層的圖片為斜面與浮雕設置值。

11、an outward bevel around a door or window that makes it seem larger
能夠讓門或窗顯得更大的一個開口的傾面。

12、Again, draw smaller circle shape. Add Bevel and Emboss and Gradient Overlay.
同樣，畫小圓圈形狀。添加斜面和浮雕和漸變疊加。

13、bevel the edges of, to make a miter joint
斜切邊緣，使成斜角拼接。

14、The theoretical analysis research of spiral bevel gear lapping with dynamic force is carried out.
該研究是國內首次對螺旋錐齒輪動態力研齒進行的理論分析研究。

15、Analysis of Cracks in Bevel Drive Gear of “EQ-153” Rear Axle
“EQ-153”汽車后橋圓錐主動齒輪裂紋分析

16、All valves can be furnished with handwheels, chainwheels and bevel gear handwheels and chainwheels.
所有閥門都可以配置手輪、鏈輪和錐齒輪手輪和鏈輪。

17、Supports shadow, Refection, Glow, 3D bevel etc. effects.
支持陰影，恢復體力，夜光，3D斜面等效果。

18、Bevel gears can be mounted at standard, 90, 180 or 270 degree mounting.
錐齒輪可以采用標準位置，90度、180度或270度位置安裝。

19、It used bevel gears to transmit power to the prop.
它使用的錐齒輪轉交權力交給道具。

20、When ordering bevel gear actuators, specify mounting position as second line information.
如果是訂購錐齒輪執行器，請?jiān)诘诙?a href="/zaoju/b2406.htm">增加安裝位置信息。

21、These drive the central propeller shaft through bevel reduction gears with a 2:1 reduction.
這些驅動器，中央螺旋槳軸通過減少錐齒輪2：1減少。

22、DESIGN FOR FORMING MOULD OF EPS PLASTIC PACKAGING OF EQ153 REAR BEVEL GEAR
EQ153后橋錐齒輪包裝襯墊模具設計

23、Revolves, canned, the V-belt pulley organization, the CAM gear, the crank slide, the bevel gear.
旋轉、罐裝、槽輪機構、凸輪機構、曲柄滑塊、錐齒輪。

24、After that, select Bevel and Emboss and just follow the image below.
在此之后，選擇斜面和浮雕，只是按照以下的形象。

25、The drive advantages and technologic advantages of plastic bevel gear were analyzed.
分析了塑料斜齒輪的傳動優點和工藝特點。

26、Shown here with a wooden handle. The bevel is set from a protractor.
這一款有一個木把手，斜角要卡在量角器上。

27、Experimental study on the error correction of spiral bevel gear.
螺旋錐齒輪誤差修正試驗研究。

28、P/M BEVEL GEAR IN 40kN JACK USED FOR CAR
轎車用40kN千斤頂粉末冶金圓錐齒輪

29、The bevel milling cutter for cutting groove of oil casing-pipes was designed.
設計了用于油氣田管道坡口切割的角度銑刀。

30、The Construction Method of European Bevel Roof
歐式斜屋面工程施工方法

bevel翻譯

n. 斜面, 斜角, 斜角規vi. 成斜角vt. 使成斜角【醫】 斜面, 傾斜 詳情