1、They are in the liquid — So here is the liquid, and the ball bearings are dropped from above.
它們?cè)谝后w中-，這是液體，這是，要放入液體的滾珠。

2、Without a compass, it is easy to lose one's bearings in the woods
在森林中沒有指南針是容易迷失方向的。

3、Installation Techniques for New Type of Bearings of Lhasa River Bridge
拉薩河特大橋新型支座安裝技術

4、Thus, the calculative formula of rigidity for two spring bearings may be obtained separately.
這樣，才有可能分別導出兩類彈簧支承(豎向的和扭轉的)的剛度計算公式。

5、The load-carrying capacity of spherical roller bearings is high.
承載能力，球面滾子軸承高。

6、The main failure mode of spherical plain bearings is wear.
關節軸承的主要失效形式是磨損。

7、The shaft shall be guided by glass-filled TFE bearings to protect against deflection.
閥桿應該由玻璃填充TFE軸承引導以確保不會偏移。

8、We can offer and supply you the bearings with high quality.
我們能為您提供優質的軸承產品，希望對你有幫助。

9、Yang designed a dashboard mount filled with steel ball bearings and lined with silicon.
楊全國設計了一種以鋼珠軸承填充并以硅襯底的儀表盤座架。

10、Magnetic azimuth bearings are approximate.
磁性方位角軸承是近似。

11、fix the bearings of a ship
測定船舶方位

12、Due to My Jack having contra props I will have 8 bearings in total.
由于我的杰克后，孔特拉道具，我將有8軸承在總。

13、The integral type forklift bearing is currently one of the forklift bearings in the widest use.
整體式叉車軸承是目前應用最廣泛的叉車軸承之一。

14、Barrel roller bearings belong to the group of self-aligning bearings.
滾子軸承屬于自我調心軸承。

15、Protection structure with blowout proof stem, low coefficient of friction bearings and so on.
閥桿采用防吹出保護結構，低摩擦系數的軸承等。

16、The three basic types of antifriction bearings are ball bearings, roller bearings, needle bearings.
減摩軸承基本上有滾珠軸承、滾柱軸承和滾針軸承三種。

17、Bearings with logarithmic profiles are less susceptible to shaft deflection and misalignment.
有對數輪廓的軸承對歪斜和角誤差不太敏感。

18、Therefore, the bearings should be set aside time to control the FIFO principle.
因此，這種軸承的擱置時間應該按先進先出的原則來控制。

19、Applicable for bearings in working conditions of rolling mill.
適合軋鋼廠軸承的工況條件。

20、So how to decrease the abrasion of bearings becomes one of the important researching subjects.
因此，如何減少軸承磨損是振動機構研究的主要課題之一。

21、Case Analysis on Improper Selection of Bearings for A Horizontal Generator
臥式發電機軸承選用不當的事例分析

22、A novel structure of motorized spindle with aerostatic bearings for micro drilling is analyzed.
針對這些要求，提出了將空氣靜壓軸承應用于超高速微鉆削電主軸支承結構中。

23、And it has bearings with high carrying capacity and combination box-shaped base.
并具有高承載力軸承；組合箱形底座。

24、Magneto bearings transmit axial forces in only one direction.
磁軸承只傳遞一個方向的軸向力。

25、And the effect of wheel tread peeling on peeling of bearings is expounded.
闡述了車輪踏面剝離對軸承剝離的影響。

26、Bad bearings or loose bearing fits.
軸承配合不良或者松動。

27、Therefore, these bearings are capable of transmitting high axial loads in both directions.
因此，這些軸承都能夠在兩個方向上傳輸高的軸向載荷。

28、The worker oiled the bearings of the machine.
那位工人給機器的軸承上了潤滑油。

29、These bearings can be separated into three, two pads are arc-shaped for deep groove ball rolling.
此類軸承可以分離成三片，兩個墊片都有供滾珠滾動的圓弧狀深溝。

30、Double row cylindrical roller bearings are good at the spindles of machine tools.
雙列圓柱滾子軸承適用于機床主軸。

bearings翻譯