1、For satisfactory fluidization under these conditions an agitator is used in the bed.
在這些情況下，為了得到滿意的流態化，在流化床中加有攪拌器。

2、Agglomerate particle was put into the fluidization bed to simulate the agglomeration malfunction.
通過向床層中加入聚乙烯塊狀顆粒來模擬氣固流化床顆粒結塊現象。

3、An experiment is made on spouting fluidization of sawdust or the quartz sand -sawdust mixture.
考察了木屑、木屑與石英砂混合物的噴動流化現象。

4、Fluidization Characteristics of Liquid-Solid Fluidized Bed Systems
液-固流化床的流化特性

5、Application of Fluidization Technology in PAN Precursor Preoxidation
流態化技術在聚 * 基原絲預氧化中的應用探討

6、The condition of fluidization differs due to different structures of each technique.
由于每種技術的構造不同，流化狀態也不相同。

7、The empirical formula on the minimum vibration intensity for fluidization is obtained.
建立了最小流化振動強度的經驗關聯式。

8、Aggregative fluidization is characterized by a clear two phase structure, viz.
聚式流態化具有明顯的兩相結構。

9、Check if fluidization upstream of rotary feeder is on, if so turn this off.
檢查運轉的飼料是否在流態化上方，如果是的話關閉這個功能。

10、Thus this chapter surveys the art of fluidization today.
因此，本章對當今流態化技術作一概述。

11、Particulate fluidization shows a structure of idealized fluidization of complete homogeneity.
散式流態化呈現出一種非常均勻的理想流態化結構。

fluidization翻譯