1、Therefore, the data file is also created with the code page 1252.
因此，數據文件也是用編碼頁 1252創建的。

2、The result of processing the data file presented above appears in Listing 2.
清單2中顯示了處理上述數據文件的結果。

3、A method of Creating BASIC Data file With edit software
用編輯軟件直接建立BASIC數據文件的方法

4、Apache FOP USES the data file together with the stylesheet to produce the PDF.
ApacheFOP聯合使用數據文件和樣式表生成pdf。

5、Recovering from a situation where there is no data file backup.
從沒有數據文件備份的情形中恢復。

6、And now the data file is restored to its previous state!
現在數據文件已還原到以前的狀態！

7、The data file is kept in the WEB-INF directory of the sample application.
數據文件放在示例應用程序的WEB - INF目錄。

8、Unable to get the setup information for printer driver '% 1' from setup data file '% 2'.
無法從安裝數據文件' %2 '獲取打印機驅動程序' %1 '的安裝信息。

9、Processing of Simulating Data File Based on CCS
CCS中基于仿真數據文件的處理

10、By default, this will save the data file as an SPSS data file.
在默認的情況下，它會將數據以SPSS文件保存。

11、Load the data file bmw-training.arff into WEKA using the same steps we've used up to this point.
使用我們之前使用過的相同步驟來將數據文件bmw - training . arff(參見下載)載入WEKA。

12、I will also create a 100mb dummy data file for the purposes of this test.
我還將創建一個100MB虛擬數據文件，以供測試之用。

13、Fill in the path and the file name for the data file you wish to create.
填入您希望創建的數據文件的路徑和文件名。

14、Note: on UNIX, the data file names are case sensitive and MUST be lower case.
注意：在UNIX上，數據文件名稱區分大小寫，而且必須為小寫。

15、The stage reads the data from a pipe or a data file and writes the data to the output link.
工作臺將從管道或數據文件讀取數據，并將數據寫入到輸出鏈接。

16、In any case, you can see the ease with which an XML data file is created.
無論何種情況，可以看到XML數據文件的創建非常簡單。

17、This view receives the JSON data file from the caller view controller.
此視圖從調用方視圖控制器接收J(rèn)SON數據文件。

18、Listing 3 shows an example data file with individual names and assigned locations in the building.
清單3中的示例數據文件含有各員工的姓名和他們在建筑物中指定的位置。

19、Note that this implicit new line of a data file is not interpreted as a character "\n".
注意，這暗示著數據文件的新行將不解釋為一個 “\n”字符。

20、Complete recovery can be done at the database level or data file and tablespace level.
完全恢復可以在數據庫級或數據文件和表空間級上完成。

21、Now that the data file has been created, it's time to create our regression model.
數據創建完成后，就可以開始創建我們的回歸模型了。

22、A simple data file is shown in Listing 7.
清單7給出了一個簡單的數據文件。

23、GREATING COBOL DATA FILE ON FLOPPY DISK UNDER CONTROL OF XENIX
XENIX環境下COBOL數據文件在軟盤上的隨機建立

24、We will use a delimited ASCII data file named staffdata.del.
我們將使用到一個叫做staffdata.del 的分隔的ASCII數據文件。

25、Use the Dispense file command to distribute the test data file evenly between the instances.
使用DispenseFile命令在實例之間均勻地分配測試數據文件。

26、The data file really only needs two files in it.
數據文件事實上只需包含兩個文件。

data file翻譯