1、The first set is blanking and punching compound die.
第一組是消隱和沖壓復合模。

2、Punching with fists and kicking with feet are allowed in taekwondo.
跆拳道允許用拳擊和用腳踢。

3、This company spent a year developing this card punching system buses
這家公司歷時一年才開發出這套公共車刷卡系統。

4、The times of feed mechanism punching shear is started from0 it can shear in free scope.
送料機構沖剪次數從0開始，任意范圍內皆能剪斷。

5、There was not any punching up between the two sides during the time.
期間兩方并無斗毆事件。

6、Influence of Punching Machine on the Life Time of Die and the Treatment
影響沖模壽命的因素及對策

7、Thus, when you hit a punching bag, it bounces right back at you.
因此，當你擊吊袋時，它就朝著你彈回來。

8、After punching him on the chin she wound up hitting him over the head.
她對準他的下巴猛擊一拳，最后又在他的頭上打了一拳。

9、a pointed tool for marking surfaces or for punching small holes.
標記表面或打小孔的尖頭工具。

10、There's a lot of who've got their couch potato tickets and they're punching them.
有很多人（傷殘退伍軍人）本可以懶在沙發上，現在他們不這么做了。

11、The Complex Stamp for Punching 600MW Turbogenerator Stator Core Segments
600MW汽輪發電機定子鐵心扇形片復合式?jīng)_裁模

12、In the punching die of printed-circuit boards, a hydraulic stripper is used.
本文介紹了在印刷線路板的沖孔模中，采用的液壓卸料裝置。

13、Case Representation for CBR System Faced to the Design of Punching Die
面向沖裁模設計的CBR系統的實例表示

14、the act of punching a role of holes (as for ease of separation).
打孔以至于很容易分離的行為。

15、He would lead them in a workout with punching pads.
他會用拳擊墊帶領他們進行訓練。

16、I will have no one punching anyone else up in my hotel.
在我的旅館里我不讓任何人動手同別人打架。

17、I'm not going go be a punching bag for anyone.
我不會給任何人當替罪羊。

18、Now we have over 60 different punching machines and all finishing machines.
本廠現有各種沖壓設備60余臺及各類精加工設備。

19、'From punching people in the face,' he replied, deadpan.
他冷冷的告訴我，也是在打別人臉的時候。

20、What's up? Hey, don't look at me with a face like, I am not your punching bag.
發生什么事了，嘿，不要拿著象被雷劈了一樣的臉對著我，我不是你的出氣筒。

21、a small sharp-pointed tool for punching holes in leather or fabric
在羽毛或織物上打眼的小的尖頭的工具。

22、a pointed tool for marking surfaces or for punching small holes
標記表面或打小孔的尖頭工具。

23、The way to shorten the operating time of the arm of the punching robot
縮短沖壓機器人手臂動作時間的途徑

24、This thin work area helps to prevent denting to your lantern when punching the design.
這個簡易的工作臺可以在你釘出圖案的時候避免弄凹燈籠。

25、When you try to bash them, you usually end up punching yourself in the nose.
當你試圖痛擊他們的時候，你通常會打到自己的鼻子。

26、I bundled a bunch of branches and anchored it on the punching bench.
我捆起一簇樹枝，將它栓在沖壓工作臺上。

27、Pattern Punch: for punching holes in order to hang patterns on a hook.
樣板鉆孔機：為了把樣板掛在鉤子上，用它在樣板上打洞。

28、Analysis for punching shear failures character of thick flat raft foundation.
童雄，厚平筏板基礎沖切破壞性能研究。

29、The alarm is switched off by punching on the top of the alarm clock.
要想關掉鬧鐘就在上面重重的來一拳！

30、What made Tyson fearsome in the ring was not just his terrifying punching power but his speed.
使泰森在拳臺上無敵于天下的不僅是他令人恐懼的重拳，還有他不可思議的速度。

punching翻譯