1、When the subroutine is called, the routine receives its parameters correctly.
當子例程被調用時，該例程正確地接收到了它的參數。

2、An Event Handler is a subroutine that executes code for a given event
事件處理器為一個子程序，它可以為指定的事件執行相應代碼。

3、The first subroutine call in the alg_N_Word function is to createRegexp.
alg_N_Word函數中的第一個子程序調用是指向 createRegexp 的。

4、A subroutine is a part of a program that can be re-used, just like movable type.
子程序是在一段程序中可以被重用的部分，就像活字那樣。

5、When the enter key is pressed, the subroutine exits if at least one character has been entered.
如果至少已輸入了一個字符，則在按下enter鍵后，子例程將退出。

6、SCM - point computation subroutine library, source testing by KEIL ok.
單片機定點運算子程序庫，源程序經KEIL測試ok。

7、A subroutine used to establish the full routine or another routine
引導程序，引導指令用來建立全部路徑或另一路徑的輔助程序

8、Then use the following subroutine to load the field weights into memory.
然后使用以下子例程將字段權重裝入內存。

9、Listing 4 shows two rules from the same subroutine of standardizing part names.
清單4顯示了來自同一個標準化部件名稱的子例程的兩條規則。

10、Listing 6 shows the processEvents subroutine called in Listing 5.
清單6顯示了在清單5中調用的processevents子例程。

11、The rule set developer has built a subroutine called PartName.
規則集開發人員構建了一個名為 PartName 的子例程。

12、Let's take a look at the subroutine and describe how it works.
讓我們來看一看這個子程序并了解一下其工作原理。

13、The sum() subroutine is implemented in a direct way.
sum()子例程是以直接的方式實現的。

14、If there is no instruction cache, this subroutine may be a no-op.
如果在你的目標機上，沒有指令緩存，則可能不做任何操作。

15、This process is called by the main subroutine to print the result.
該進程被主子例程(標為：main以告訴Parrot首先運行它)調用以打印結果。

16、The end result is, in all cases, a subroutine with a call interface.
在所有情況下最終的結果都是帶有調用接口的子例程。

17、This mode is often used for global variable access, branching, and subroutine calls.
這種模式通常用于全局變量訪問、分支以及子程序調用。

18、The munmap subroutine only unmaps regions created from calls to the mmap subroutine.
munmap子例程只是取消 對mmap 子例程的調用而創建的區域的映射。

19、A subroutine used to establish the full routine or another routine.
引導程序，引導指令用來建立全部路徑或另一路徑的輔助程序

20、The setup subroutine runs just once on startup and initializes the server.
setup子例程只在啟動時運行一次，以便初始化服務器。

21、If there is no instruction cache, this subroutine may be a no-op
如果在你的目標機上，沒有指令緩存，則可能不做任何操作。

22、The kmlHeader subroutine prints out the main header markup for the KML document.
kmlHeader 子例程將輸出KML文檔的主要頭標記。

23、The plot subroutine of the GD::Pie module expects an array of arrays.
Pie模塊的標繪子程序期望獲得一批數組（標簽和數據值）。

24、Listing 3 shows the variable declaration and subroutine calls from the program header.
清單3顯示了程序頭文件中的變量聲明和子例程調用。

25、The letters array is searched using the acronymSearch subroutine described below.
使用如下所示的acronymsearch子例程搜索字母數組。

26、DW_TAG_subprogram - a global or file static subroutine or function.
DW _ TAG_subprogram：一個全局或文件靜態子例程或函數。

subroutine翻譯