1、Must carry on the blanking force and the center of pressure computation once more.
再次要進行沖裁力和壓力中心的計算。

2、The blanking clearance and rational blanking clearance are narrated.
敘述了沖裁間隙和合理沖裁間隙。

3、Cutting: refers to the workpiece through the LASER cutting or CNC punch blanking process.
下料：指工件經過LASER切割或數控沖床沖裁的工藝過程。

4、The precision of present blanking method is very low, the automation degree is not high.
現行的下料方法精度很低，自動化程度不高；

5、In addition, the second end is connected with the blanking hole.
另外，該上所述第二端為與掉料口連接。

6、Application of the Node Method in CAD System of the Blanking Die Design
結點法在沖裁模CAD系統中的應用

7、The first set is blanking and punching compound die.
第一組是消隱和沖壓復合模。

8、An Easily Extended Application of Blanking Die by CAD
一種易于推廣應用的沖裁模CAD

9、Failure Analyses of Blanking Die Made of Cr12 Steel
Cr12鋼冷沖模早期失效原因分析

10、There are usually burrs in the fracture of thin sheet parts stamped with steel blanking die.
用常規鋼制沖模沖裁薄片零件，斷口常有毛刺。

11、In the blanking of thin material, blanking dies without clearance are usually chosen.
在沖裁薄料時，通常要用的是無間隙的沖模。

12、The Application of 012AL on the Blanking Die for Nut
012Al在螺母沖頭模具上的應用

13、Blanking layout is a NP problem, and is widely needed in the industry.
沖裁件的排樣是一個NP問題，在工業界具有廣泛的需求。

14、Remove the blanking caps from the electrical connector and the receptacle.
拆下電插頭(9)以及接頭(10)上的堵蓋。

15、Readout of the captured image proceeds at the completion of blanking as new frame scanning begins.
在熄滅完成，新的幀掃描開始的時候，所捕捉的圖像繼續讀數。

16、The die is reliable in operation and makes high quality blanking pieces.
該模具工作可靠，切料質量高。

17、Blanking gap is the difference size between the male die and female die's work part.
沖裁間隙是指沖裁凸模和凹模之間工作部分的尺寸之差。

18、Based on the example, sets up a mathematic mould for jacking blanking and solving it with computer.
本文通過實例建立套裁下料問題的數學模型并使用計算機對其求解。

19、Design of Multistation Blanking Die Joined by Chain
鉸鏈連續沖裁模設計

20、Blanking gap has great effect on the blanking procedure.
沖裁間隙對沖裁過程有著很大的影響。

21、The blanking force calculation of blanking through inclined sheet metal is an outstuding subject.
傾斜板料沖裁的沖裁力計算是一個尚待研究的課題。

22、A polygon vertex algorithm is a new optimizing method of blanking layout.
多邊形頂點算法是沖裁排樣優化問題的一種新算法。

23、The adaptive sidelobe blanking is an effective measure against active jamming.
旁瓣消隱技術（SLB）是雷達抗有源干擾的有效方法。

24、It is critical calculating blanking step in normal single row optimum layout.
普通單排優化排樣中沖裁步距的計算非常關鍵。

blanking翻譯