1、Study on Plastic Injection molding Design Based on CBR
事例推理技術在注塑模設計中的應用研究

2、A method of fault injection software testing based on EAI model
一種基于EAI模型的軟件安全測試方法

3、The clear bone-imaging was obtained at 75min after injection of Tcm-ZL.
兔顯像表明,靜脈注射75min后,即可獲得清晰的骨顯像。

4、The applications and mould design of injection mould computer aided engineering are introduced.
著重介紹了注塑模具計算機輔助制造（CAE）的應用和模具設計。

5、Objective: To observe the effect of radix astragali injection on children with viral myocarditis.
目的：觀察黃芪注射液佐治小兒病毒性心肌炎的臨床療效。

6、The peak concentration after injection of turbinate was higher than that of injection of muscle.
但鼻甲注射方法的達峰濃度較肌注高。

7、Objective: Observation of the effects of compound salvia injection on neonates scleredema.
目的：觀察復方丹參注射液對新生兒硬腫癥的臨床療效。

8、Ct: Unity is a Dependency Injection container.
ct：Unity是一個依賴注入(Dependency Injection,DI)容器。

9、Study on Flexibilization of BMC Materials and its Injection Process
BMC材料的增韌及注射成型工藝研究

10、The cored wire injection process was used to produce vermicular cast iron.
應用喂絲工藝生產蠕墨鑄鐵。

11、Purpose: To explore the mechanism of Shenfu Injection in treating cancer cachexia c.
目的：探討參附注射液治療腫瘤惡病質的作用機制。

12、Objective to evaluate the effect of Xiaozhiling injection on the treatment of simple rectocele.
目的觀察消痔靈注射液治療單純性直腸前突的臨床療效。

13、Methods Subacute senile mice model was established by injection of D-galactose.
方法通過注射D半乳糖建立亞急性衰老小鼠模型。

14、You hear both Inversion of Control and dependency injection used almost interchangeably.
您聽說過控制反轉和依賴注入幾乎可以互換使用。

15、The injection complies with the requirements stated under Parenteral Preparations.
該注射液符合要求胃腸外給藥的要求。

16、EXACT FORMING OF INJECTION OF THE BUSH OF REINFORCED PEEK/CF
增強聚醚醚酮襯套的精密注塑成型

17、Design of Injection Mold with Long Core
一種長型芯的注射模設計

18、Conclusion: injection plaster is effective on local blood vessel distending and local analgesia.
靜脈輸液前使用注射貼可有效擴張局部血管和局部鎮痛。

19、Surface lines the scale up, it's often depress out flow of water injection lines.
油田地面注水管線結垢，會降低管線的流量。

20、Objective: To investigate the efficacy of Astragalus Injection on diabetic nephrosis.
目的：觀察黃芪注射液治療糖尿病腎病的療效。

21、RESEARCH ON NODE ANALYTICAL METHOD IN STEAM INJECTION PROCESS
蒸汽注入過程中節點分析方法研究

22、Finally, an injection compression mold with a Huff bar structure is taken as an example.
最后，舉出了一個帶有哈呋條式的注壓模具結構。

23、The combination of etamsylate injection with famotidine, ranitidine, or cimetidine is stable.
酚磺乙胺注射液與雷尼替丁、法莫替丁、西米替丁配伍穩定。

24、In both groups, patients received an injection of saline into the catheter.
這兩個組的患者都接受了通過導管注射生理鹽水的治療。

25、Feasibility Study on Waste Plastics Injection in AISC BFs
鞍鋼高爐噴吹廢塑料的可行性研究

26、Paravertebral injection for the treatment of protrusion of intervertebral disc;
目的 觀察椎旁神經阻滯在疼痛治療中的效果。

27、Objective To observe the Compound Danshen Injection on the treatment of bronchiolitis.
目的觀察復方丹參注射液對小兒毛細支氣管炎的治療效果。

28、Technology of Intelligence Diagnosis in Injection Parts Bug Analysis
注塑件缺陷智能診斷技術

29、The injection site is bandaged. Patients can usually leave the hospital the same day.
注射部位貼創可貼。通?；颊咴诋斕炜梢噪x院。

30、Objective To observe the effect of methotrexate injection through intubation by hysteroscopy.
目的觀察宮腔鏡插管注入氨甲蝶呤治療輸卵管妊娠的療效。

injection翻譯

n. 注射, 注射劑【化】 注入; 注射【醫】 注射, 注射液, 充血【經】 注入, 注水 詳情