1、The IBM Debugger for AIX tool provides the following breakpoint types.
AIX工具的IBM調試器提供了以下的中斷點類型。

2、Press the spacebar again, and the breakpoint once again is enabled.
再按一次空格可以重新啟用斷點。

3、To debug the code you have to set a breakpoint first.
要調試代碼必須先設置斷點。

4、To clear breakpoint number 1.
清除斷點號1。

5、To list all the breakpoints in the breakpoint table.
列出斷點表中的所有斷點。

6、Add a breakpoint at Line 6 and save the change.
在第6行添加一個斷點，并保存更改。

7、Set a breakpoint on the new query and then start debugging to step through the function.
在新查詢中設置斷點，然后開始單步調試函數。

8、This is where the conditional page of the breakpoint wizards is very useful.
此時就是中斷點向?qū)?/a>的狀況頁面大有用武之地的地方了。

9、For example, a breakpoint could be set on a particular control flow.
例如，可以在特定的控制流程中設置斷點。

10、You can double-click a breakpoint to display its location in the editor.
您可以在編輯器中雙擊一個斷點來顯示其位置。

11、Only after the second breakpoint is picked up will the first become active.
只有當?shù)诙€斷點被檢取后，第一個才會成為活動的。

12、The commonly used breakpoint commands are bp, BC, bd, be, and bl.
常用的斷點命令有bp、bc、bd、be和bl。

13、The argument to this command is also the breakpoint number.
該命令的參數也是斷點號。

14、It takes in a breakpoint number as an argument.
它接收斷點號作為參數。

15、Using a debugger, put a breakpoint at the main function, and run the instrumented program.
利用一個調試器，將一個觀察點main函數上(或者置于您想要關閉Purify錯誤報告的程序單元上)，然后運行儀表化程序。

16、Doing this disables the breakpoint, and the breakpoint icon turns grey.
這個操作將斷點禁用，斷點會變成灰色。

17、Add a breakpoint in the SQL body.
在SQL主體中添加斷點。

18、Execution is stopped and control is given to KDB when this breakpoint is hit.
當遇到該斷點時則停止執行并將控制權交予KDB。

19、A blue sphere appears indicating a breakpoint is set for this line.
這樣就會出現一個藍色圓點，它表示已為該行設置了斷點。

20、An ideal solution for this has no overhead and simply suspends the thread when a breakpoint is hit.
對于這一問題的理想解決方案應該是不引入額外開銷，然后在遇到斷點時將線程掛起。

21、A breakpoint symbol appears in the left margin next to the function call name.
斷點符號出現在函數調用名稱旁的左邊距中。

22、Listing 1: Breakpoint alias commands.
清單1：斷點別名命令。

23、Listing 8: Breakpoint information in the GDB Debugger xterm.
清單8：gdb調試器xterm中的斷點信息。

24、Position the cursor on the details of the first breakpoint and press the spacebar.
將光標放到第一個斷點的詳細信息上，按下空格。

25、Execution of the probed instruction results in a breakpoint fault.
執行被探測的指令會導致斷點錯誤。

26、Set a breakpoint within the project, as shown.
在項目內設置斷點，如圖所示。

27、First, create a breakpoint in our code.
首先，在代碼中創建一個斷點。

28、Whenever the breakpoint is hit, you can determine whether I is even or odd.
不管何時觸動了該中斷點，您都可以決定i是奇數的還是偶數的。

29、You can toggle a breakpoint by double-clicking the gray margin beside the line of code.
通過雙擊代碼行旁邊的灰色空白邊，就可以設置斷點。

breakpoint翻譯