1、The company is forging ahead with its plans for expansion.
公司的拓展計劃正順利進行。

2、Study on cold precision forging of spur gear forms
齒輪冷精鍛成形工藝的研究

3、Rather, Obama is forging his own way, says Mr. Brennan.
事實上，奧巴馬正在形成自己的處事風格。他說。

4、However clever a counterfeiter is, forging that is likely to prove impossible.
無論造假術多么高明，仿造它的可能性都幾乎為零。

5、Forging credit CARDS.
偽造信用卡的。

6、History is not a science, just by forging and abridged will be like a science.
歷史還不是一門科學，僅僅靠偽造和刪節才會被弄得像門科學似的。

7、He's getting good at forging his mother's signature.
他把母親的簽名偽造得越來越惟妙惟肖了。

8、The Application Prospects of Forging Die by Squeezing Casting
擠壓鑄造制備熱鍛模具的應用前景

9、Design of the New-Typed Forging Die for the Planet Gears
新型行星齒輪鍛模設計

10、So, it is always formed on the die-forging hammer by the open-die forging with insert mode.
液壓支架中的缸底生產批量不是太大，外形多變，所以它多在錘上用鑲塊模開式模鍛成形。

11、Objective To study the enclasp forces of cast clasp and forging clasp.
目的　研究鑄造卡環和鍛造卡環的卡抱力。

12、This is easier said than done, but Messrs Obama and Duncan are forging ahead.
說起來容易做起來難，但奧巴馬和鄧肯兩位先生正穩步前進。

13、Isothermal forging process of upper anti-torque arm of 2214 alloy
2214鋁合金上防扭臂等溫模鍛工藝的研究

14、Our country makes the first ten thousand ton hydraulic press is the hammer forging hydraulic press.
我國制造的第一臺萬噸水壓機就是自由鍛造水壓機。

15、My work has been forging ahead recently.
近來我的工作穩步前進。

16、The Properties of a hot forging die steel 5Cr2NiMoV used in the Press
壓力機熱鍛模用5Cr2NiMoV鋼的性能

17、They used the shackle made by the God of war, it was forging nine days and nights.
他們所使用的戰神，它是鍛造九天夜所作的桎梏。

18、Isothermal Forging Process of 2214 Alloy Anti-torque Arm
2214鋁合金防扭臂等溫模鍛工藝的研究

19、everyone full of vigour, each one forging ahead
人人振奮， 個個當先

20、That afternoon I addressed myself to forging a note.
那天下午，我將自己寫進一張偽造的字條。

21、The hydraulic press produces the general pressure is big, commonly used in forging and ramming.
水壓機產生的總壓力較大，常用于鍛造和沖壓。

22、The Forging Technology Optimization of SA-299 End Cap
SA-299端蓋鍛造工藝優化

23、Bachelor degree or above in forging or related major.
鑄造、鍛造或相關專業本科以上學歷.

24、Starter Drive, Transmission Shaft, Cold Forging Parts, Lift Motor.
單向器，傳動軸，冷擠壓件，搖窗電機。

25、Study of Little Allowance Forging Process of a New TMC-2 Composite
新型TMC-2復合材料葉片小余量鍛造工藝研究

26、This paper analysed the cold die forging technology of automotive epicyclic gears.
分析了汽車行星齒輪的冷模鍛工藝。

27、The results shown that the new way of precision die forging is very efficient.
結果表明，閉式精鍛工藝的新方法是十分有效的。

28、The gear forging formation is a complicated and large plastic deforming process.
齒輪鍛造成形是一個復雜的塑性大變形過程。

29、Systems Analysis on the Failure of Steel Forging Die
鋼制鍛模失效的系統分析

30、Introduced the research and development of an intellective free forging CAPP.
介紹了自由鍛造CAPP智能化系統的研究和開發技術。

forging翻譯