1、The superstructure has a depth of 3 ft. 6 in. with a marked camber of 19 ft. 8 in.
上部結構的建筑高度為3英尺6英寸，有19英尺8英寸顯著的上拱度。

2、It will result in: increase of taper, inner corner Angle and camber is swept past outwards.
這種情況會造成：錐度增加、內棱角問題、弧形向外掠出。

3、This feature is useful in solving center flexure as well as mitigating camber of product.
這一特征有助于解決中心彎曲以及減輕產品的彎度。

4、The automatic camber control system AGC of the line is consist of first PLC and secondary computer.
該生產線的自動凸度控制系統AGC是由一級PLC和二級計算機組成的。

5、Inward tilt is negative camber and outward tilt is positive camber.
向內傾斜，是消極的拱和拱向外傾斜是積極的。

6、Camber angle fixing, preventing automobile' s suspending and data's pulsating.
外傾角固定功能，防止車身懸起數據跳動；

7、Adjust camber link so that it is more level, in the front.
調節前輪內傾角調節桿使得它更接近水平。

8、In this thesis, the basic aspects about forming process of camber die are studied etically.
本論文對曲面凹模成形工藝的若干問題進行了系統的理論分析。

9、Then, the camber equation has been developed for the cross points.
然后解曲面方程求出交點。

10、But during the practical application, the surface camber of the figure is different.
但是在實際應用中，圖形的表面曲率是不一樣的。

11、The front subframe is modified for extra camber and castor.
前副車架被修改為額外拱形和蓖麻。

12、Determine the camber factor.
確定曲面的因素。

13、The measures for improving wear of camber for lockup were proposed.
針對鎖緊弧面的磨損提出了改善措施。

14、This wheel travel does not affect the camber or caster geometries like current vehicles.
該系統不會和目前的其他車輛那樣影響外、縱傾角的幾何參數。

15、The contents of back wheel′s design include camber angle and toe-in;
后輪設計有后輪外傾角和后輪前束；

16、The equation of camber is often used when the bend of girder is being studied.
在對梁的彎曲進行研究時，經常要用到彎矩方程。

17、You can specify wing attributes including camber and centerline sheeting of an airfoil.
你能夠標示翅膀歸結于包括中凸形和機翼的中心線護墻板。

camber翻譯

n. 弧形, 中凸形, (機翼的)彎曲度vi. 成弧形vt. 使彎作弧形【機】 弧面, 曲度, 外傾角 詳情