1、Pure Fe nanopowders were prepared successfully by method of anodic arc discharging plasma.
采用陽極弧放電等離子體制備了高純鐵納米粉末。

2、Development of New Type Flat Link with Arc Tooth
新型弧形齒扁平接鏈環的研制

3、The cathode electric arc source is used as the source of ion infiltrating metals.
本文用陰極電弧源做離子滲金屬源。

4、Design of Three-convolution Circular Arc Corrugated Diaphragms
三圓弧波紋膜片的設計

5、AN EXPERIMENTAL INVESTIGATION ON ARC SKEWED SLOT CASING TREATMENT
圓弧斜槽處理機匣的實驗研究

6、Design of Arc Template of Wormwheel
蝸輪圓弧樣板的設計

7、Construction of Big Span Prestressing Force Arc Beam
大跨度預應力弧形梁施工

8、ADAPTIVITY OF ARC SPECTRUM IN SENSORING DROPLET TRANSFER OF MIG/MAG WELDING
以電弧光譜信號傳感MIG/MAG焊熔滴過渡的工藝適應性

9、AIR PLASMA ARC CUTTING OF GALVANIZED STEEL PLATE
鍍鋅鋼板的空氣等離子弧切割

10、Discussion and analysis of arc extinguishing coil compensation
消弧線圈補償的探討與分析

11、Analysis of grounded overvoltage through arc at field has been also carried out.
并對實際發生的弧光接地過電壓進行了分析。

12、He found franklin for instance trimming arc lamps in an ipswich factory for a few shilling a week.
例如，他發現富蘭克林在伊普斯威奇市的一家工廠里做裝飾弧光燈的工作，一星期只賺幾個先令。

13、This has changed the arc of Hollywood careers.
好萊塢的發展模式因此發生了改變。

14、DYNAMIC ANALYSIS OF SPECIFIC HEAT DENSITY OF Ar ARC BRAZING ZONE
氬孤釬焊加熱區比熱流分布的動態分析

15、Investigation of Underwater Arc Cutting and Its Technological Parameters
水下電弧切割現象和工藝參數的研究

16、Study of the Ar Arc Weldability of Hot Dip Aluminized Steel
熱浸鍍鋁鋼氬弧焊焊接性的研究

17、Model XBSG-6/50 Arc Suppression Coil of Automatic Tracking and Compensation
XBSG－6／50型自動跟蹤補償?shù)南【€圈

18、A Study on Tooth Strength of New Type Arc Toothed Belt
新型圓弧齒同步帶基礎理論的研究

19、Design and Application of a Spinal Arc Auto-retractor
脊柱弧形自動拉鉤的設計與術中應用

20、Design and Construction of a Bonded Prestressed Arc Box Beam with 40m Long
跨度40m的預應力弧形箱梁設計與施工

21、Basic Meshing Principle of Double arc Gear with Circular Arc Trace
圓弧齒線雙圓弧齒輪的基本嚙合原理

22、A STUDY OF AC ARC STABILITY OF LOW-HYDROGEN BASIC ELECTRODES
堿性低氫電焊條交流穩弧性試驗研究

23、CRYSTAL MORPHOLOGY AND FEATURE OF THE DIAMOND FILMS BY DC ARC DISCHARGE
直流弧光放電等離子體CVD金剛石薄膜中的晶體類型與特征

24、Stable electric arc can be ensured from undercurrent to high current.
從小電流到大電流都可以保持穩定電弧。

25、As I posted earlier, ARC will begin to publicize these statistics on a regular basis next year.
我之前曾提過，ARC明年會定期公開這些數據。

26、Understeer is when the front wheels are carving a larger arc than the rear wheels.
當前輪劃出的圓弧比后輪劃出的圓弧更大時，就是發生了轉向不足。

27、Grounding Method of High Resistance Parallelled with Arc Suppression Coil
高電阻與消弧線圈并聯的接地方式

28、APPLICATION OF PULSED PLASMA ARC WELDING TO BOILER TUBING SYSTEM JOINTING
脈沖等離子焊接在鍋爐管系制造中的應用

29、It is also suitable for carbon arc gouging using up to 10mm diameter carbon electrodes.
它也適用于直徑達10毫米的碳棒進行碳弧氣刨。

30、Study of Modeling the Electric ARC Furnace and Its Application
電弧爐建模研究及其應用

arc翻譯

n. 弧, 弧形, 弓形, 弧光【化】 弧【醫】 弧, 弓 詳情