1、RESULTS To build effective system and decrease abrasion and uselessness of oral apparatus.
結果建立了口腔器械有效的消毒與管理措施，器械的丟失與損壞明顯減少。

2、However, the term may refer to stiffness or refer to resistance to scratching, abrasion or cutting.
這個之外，這個詞還有可能指代剛度或是材料的抗刮傷、抗磨損、抗剪切的能力。

3、Analysis on adhere abrasion of bush of diesel engine
柴油機軸瓦粘著磨損分析

4、A Study of Abrasion Resistance of Gold Coatings with Pulse Plating
脈沖鍍金層耐磨性能的研究

5、Because there is no abrasion between the concave and convex, the nut is reusable.
由于凹面與凸面之間沒有磨損，螺母可以重復使用。

6、Influence of Nitrizing,Boronisation on Abrasion Resistance of Cr12Mo1V
滲氮、滲硼對Cr12Mo1V鋼耐磨性的影響

7、And they, too, had abrasion marks near these holes.
另外，它們同樣在孔的附近有摩擦的痕跡。

8、Appraising about Abrasion Resistance of Cylinder Liner and Fitting
氣缸套及配副耐磨性評價

9、Pseudothermal temperature can be used to describe abrasion level.
顆粒擬溫度可探討性地成為葉片磨損程度的衡量指標之一。

10、A Study on How to Improve the Abrasion Resistance of Gear Shaft
提高齒輪軸耐磨性的研究

11、Study shows that quenched boron eutectic structure possesses the excellent wear abrasion property.
研究表明：硼共晶組織經淬火后，具有優良的抗磨粒磨損性能。

12、We can consider this a special case of abrasion resistance.
我們可以認為這是一個特殊情況耐磨性。

13、rotating abrasion or repeated blows; a bit
鉆帶切割刃或尖端的工具，用于在堅硬材料上鉆孔，一般靠旋轉磨損或反復擊打實現鉆孔

14、Good impact and abrasion resistance. Excellent gas cutting property and weldability.
良好的抗沖擊耐磨性，很好的可氣割性和可焊接性。

15、tear strength 41.6 -39.0 kN/m,and abrasion loss 0.234-0.424cm3.
撕裂強度41.6—39.0 kN/m; 磨耗0.234—0.424 cm~3。

16、an abrasion of the skin
皮膚上的一處擦傷

17、Discussion on the Factors Influencing Abrasion Resistance of Film
影響漆膜耐磨性測定因素的探討

18、The mechanism of tyre abnormity abrasion and the countermeasures
輪胎異常磨損機理及對策

19、Rail Head Abrasion Monitoring System based on figure technology
基于圖形技術的鋼軌頭部磨損監測系統

20、The main cause for arcing is the severe extrusion and abrasion on the fixed part of the wires.
而導致這兩根導線之間產生電弧的直接原因則是導線在固定卡子部位出現了嚴重擠壓和磨損。

21、A Study on RCM Multi-ElementLow Abrasion Resistant White Cast Iron
RCM多元低合金抗磨鑄鐵的研究

22、Has good abrasion resistance, elasticity, tensile strength and elongation.
具有很好的耐磨性、彈性、扯斷強度及伸長率。

23、There are scouring abrasion and impact wear two basic types.
有沖刷磨損和撞擊磨損兩種基本類型。

24、A STUDY ON REINFORCED AND ABRASION RESISTANCE NYLON 6
增強耐磨尼龍6材料的研制

25、Objective to investigate the relationship between tooth abrasion and long-term chewing betel nut.
目的：探討長期咀嚼檳榔與牙體磨損的關系。

26、Therefore, it is crucial to detect the abrasion of wheelsets accurately.
因此準確的檢測車輪的磨耗狀況是非常重要的。

27、The results showed that melting loss and abrasion were the main cause of tuyere failure.
對紫銅貫流式高爐風口的失效進行了分析，結果表明：熔損和磨損是高爐風口損壞的主要方式。

28、A STUDY OF THE MECHANICS OF WET ABRASION FOR POLYMER-STEEL SLIDING PAIRS
高分子材料-鋼摩擦副濕磨粒磨損機理的試驗研究

29、Study of The Abrasion Resisfance Mechanism of Cr-Mn High-Carbon Steel
Cr—Mn高碳鋼耐磨機理研究

30、The influence of wear time and load on the abrasion of UHMWPE was demonstrated.
考察了磨損圈數（磨損時間）、載荷對其耐磨性的影響。

abrasion翻譯

n. 磨擦, 磨損, 磨損處【化】 磨耗; 磨蝕【醫】 擦除, 擦傷; 磨損, 磨耗【經】 蝕損 詳情