1、Titanium alloy material samples were treated with nitriding technique.
牙用鈦合金TC4 ，使用滲氮表面技術處理。

2、Research on Creep Crack Growth of HK—40 Alloy with High—Temperature COD
用高溫COD研究HK-40合金蠕變裂紋擴展

3、Determination of Sn in Magnesium Alloy by Spectrophotometry
分光光度法測定鎂合金中的錫

4、Study on Black Ni-Sn Alloy Coating of Solar Selective Absorptance
選擇性吸收黑色鎳-錫合金鍍層的研究

5、A Performance Test of LY12 Aluminium Alloy Bar Cold-drawn before Quenching
LY12合金冷拉棒性能的研究

6、Study on Explosive Cladding Interface of Tantalum Alloy with Steel
鉭合金與鋼 * 復合界面的研究

7、A new process of electroless blackening on aluminum alloy was developed.
開發出一種鋁合金化學發黑新工藝。

8、This paper introduces the analysis method of silver-antimony alloy coating and antimony content.
介紹了銀-銻合金鍍層和鍍液中銻含量的分析方法。

9、An alloy of two or more metallic elements.
合金兩種或多種金屬所合成的金屬

10、The built-in alloy wires localize a stylus on the x, y, and z axis points.
內置的合金線路將在x,y,z軸上定位輸入筆的位置。

11、DYNAMIC BEHAVIOR AND APPLICABILITY OF LEAD ALLOY ABSORBER
鉛合金減震器的動力特性及適用范圍

12、an 80/20 alloy of nickel and iron; easily magnetized and demagnetized.
鎳和鐵的合金，易于磁化和消磁。

13、Effects of Ni-P Alloy Deposit on SCC of 321 Stainless Steel
Ni-P合金鍍層對321不銹鋼應力腐蝕開裂的影響

14、OPTIMIZATION OF HOT CHARGING PROCESS OF CC BILLET OF ALLOY STEEL
優化合金鋼方坯連鑄熱裝工藝的幾點探討

15、High power transverse flow CO2 laser was used to scan the brazing alloy and diamond grits.
采用高功率橫流CO2激光掃描釬料合金與金剛石顆粒。

16、The Study of Multielement Low Alloy Bainitic Cast Steel Grinding Ball
多元低合金貝氏體鑄鋼磨球的研究

17、Docorative Black Ni Alloy Electroplating
裝飾性黑色鎳系合金電鍍

18、The preparation of ternary boride hard alloy cladding layer on steel substrate is studied.
研究采用鑄滲法制備三元硼化物硬質合金覆層鋼基材料。

19、Black Ni-Sn Alloy Plating Process
槍黑色鎳錫合金電鍍工藝

20、Exploration of the LFC Process for the Magnesium Alloy Intake Manifold
鎂合金進氣歧管消失模鑄造工藝的試驗初探

21、Quick Determination of Silicon Content in Iron-Base Alloy by Thermo-Emf
熱電動勢法快速測定鐵基合金中硅含量

22、This product pulling chuck and all adopt special aluminum alloy frame, ensure no deformation force.
本產品拉網夾頭及框架全部采用專用鋁合金型材制作，保證受力后不變形。

23、The hardness of the alloy decreased as the annealing temperature increased.
退火溫度越高，硬度下降幅度越大。

24、Simultaneous Determination of Cr, Mo and V in Alloy Tool Steel by ICP AES
ICP-AES法同時測定合金工具鋼中的Cr、Mo、V

25、Study on the Application of Titanium Alloy Backbone Panel
鈦合金脊柱板的應用研究

26、LY12 alloy was processed with 100?kW micro-arc oxidation(MAO) power.
采用自行研制的100 kW大功率微弧氧化電源設備,對LY12鋁合金進行表面處理。

27、Drum material for galvanized steel, stainless steel, aluminum alloy material.
滾筒材質多為碳鋼鍍鋅、不銹鋼、鋁合金材質。

28、TECHNOLOGICAL STUDIES ON EQUIAXED GRAIN REFINEMENT IN TC11 Ti ALLOY BAR
TC11鈦合金棒材顯微組織等軸細晶化工藝研究

29、The Grain Size in Cylindrical Casting of ZL108 Alloy with Na or P Modifler
鈉磷變質ZL108合金圓柱體鑄件中的晶粒尺寸

30、Wire of other alloy steel.
其他合金鋼絲。

alloy翻譯

n. 合金vt. 將...鑄成合金, 減低成色vi. 合鑄【化】 合金【醫】 合金【經】 合金 詳情