1、When one coil of servo valve is broken, the system works in going order.
但系統在伺服閥線圈一路斷開的情況下，余度伺服作動系統仍能正常工作。

2、Aileron servo pull rod should be vertical to the shaft of aileron basically.
副翼舵機拉桿應基本上垂直于副翼轉動軸線。

3、Analyze and Simulate the Servo Control System of PMSM in Matlab
利用Matlab對PMSM伺服控制系統仿真簡析

4、Stabilization and track are the two main functions that its servo system must try to accomplish.
穩定與跟蹤是其伺服系統要實現的主要功能。

5、Frequency Response Analysis for Servo System of GDF-003 Twin 35 mm AA Gun
GDF-003雙35mm高炮隨動系統頻響分析

6、In my design, the aileron servo is installed between the motor and the main shift holding tube.
在我的設計，副翼伺服安裝之間的汽車和主要轉向控股管。

7、Press; Servo motor; Control system; Energy regeneration;
機械制造；控制系統；壓力機；伺服電機； 開發；

8、I made a simple brass servo mount that's bolted to the end cap.
我提出一個簡單的黃銅伺服山認為的螺栓到去年底的上限。

9、And the key technology of the servo turret is the position control technology.
而伺服刀架的核心技術就是伺服電機的位置控制技術。

10、The Design of AVR Based Servo Controller
基于AVR的舵機控制器設計

11、Can be connected with any servo motor around the world.
可適配全球任何一臺伺服電動機。

12、Testing and Wavelet-based Noise Suppression of Servo Valve Step Response
電液伺服閥階躍響應測試及其小波消噪處理

13、The Servo Control System Using 80C196KB/KC Single Chip Microcomputer
80C196KB/KC單片機控制的伺服系統

14、Design and Study for a Brushless DC Motor Phase -Locked Servo Systems
無刷直流電動機鎖相伺服系統的設計和研究

15、Servo valves are very important for servo control systems.
伺服閥是伺服控制系統中的重要元件。

16、At present, the major application trend of servo system is AC frequency conversion servo system.
變頻交流伺服系統是目前伺服系統應用的主要趨勢。

17、The elevator servo and aileron servo connect to the unit.
電梯伺服和副翼伺服連接到單位。

18、So, the ability of antipollution becomes the important performance of electrohydraulic servo valve.
因此，抗污染能力成為電液伺服閥的重要指標。

19、The reciprocating motion of differential cylinder servo system is asymmetrical.
差動缸液壓伺服系統往復運動是非對稱的。

20、According to valve's control mode, it is divided into servo actuator and switch actuator.
根據閥門的控制方式，可分為伺服型執行機構和開關型執行機構。

21、Telepresence with Force-feedback to Electronhydraulic Servo Telerobot
電液伺服遙操作機器人的力覺臨場感研究

22、DEH Servo Control System and Analysis of the Fault at Position Feedback
DEH伺服控制系統的位移反饋故障分析

23、Dynamic design of NC machine DC servo system
數控機床直流位置伺服系統動態設計

24、The Research of AC Servo in ELO and ETU Control System
交流伺服在電子送經電子卷取控制系統中的應用研究

25、This paper presents a digitized DC motor position servo control system based on DSP.
提出一種基于數字信號處理器（DSP）的全數字直流位置伺服控制系統。

26、THE ASTRODOME SERVO SYSTEM OF THE 60 cm TELESCOPE
60厘米望遠鏡圓頂隨動系統

27、Finally, according to the servo model, the galvanometer scanner servo circuit is designed.
最后，根據伺服系統的理論模型，設計了振鏡掃描器伺服驅動電路。

28、It is digital servo timing control system which is driven by PWM, direct current moment motor.
采用了脈沖調寬功放裝置(PWM)，直流力矩馬達直接驅動轉臺框架的數字伺服調速體制。

29、A rudder servo controller for hexapod robot platform is designed.
設計了應用于小型六足仿生機器人的舵機控制器。

30、Research on Servo Cotrol System of Track Device for Lunar Rover
月球車跟蹤裝置伺服控制系統研究

servo翻譯

n. 伺服, 伺服系統【計】 伺服裝置【化】 隨動系統; 隨動裝置 詳情