1、Cutting: refers to the workpiece through the LASER cutting or CNC punch blanking process.
下料：指工件經過LASER切割或數控沖床沖裁的工藝過程。

2、To join the workpiece should be oil removal of nitrate.
向硝鹽內加入工件應去除油污。

3、RESEARCH ON TRANSFORMATION OF WORKPIECE INFORMATION IN CAD/CAPP
CAD/CAPP中零件信息共享的研究

4、For rotation of the workpiece around the horizontal axis.
對于周圍的水平軸轉動工件。

5、We have workpiece materials from a very soft, buttery consistency to very hard and shear resistant.
我們的工件原材料從非常軟，像黃油一樣黏稠的到非常硬的有抗剪力都有。

6、The workpiece and fixture should be fully dry before loading.
工件與夾具裝爐前應充分烘干。

7、Quite molten pool, little spatter and no undercut ensure workpiece be in good welding appearance.
焊接熔池平靜，飛濺小，不咬邊，焊縫成形美觀。

8、Using frequency conversion stepless governing for workpiece rotating.
工件旋轉采用變頻無級調速。

9、Upper ejector rod was added in the die structure for ease of workpiece separation.
在模具結構中增加了上項桿(上打料棒)，便于工件脫離。

10、Induction surface hardening of the workpiece material is usually carbon steel.
感應加熱表面淬火的工件材料一般為中碳鋼。

11、Conception and classification of weld workpiece feature were introduced.
提出了焊接工件特征的概念和分類。

12、Implenention of IGES-based CAD/CMM Automatic Workpiece Modelling
基于IGES的CAD/CMM零件自動建模的實現

13、High control precision and automaticity, good consistency of heat-treating workpiece quality.
控制精度及自動化程度高，熱處理后工件質量一致性。

14、Large scale workpiece in several big range measuring parts of the rapid inspection.
大型工件大范圍內多處測量部位的快速檢驗。

15、If the workpiece is of simple construction, the jig may be clamped on the workpiece.
如果工件結構比較簡單，鉆?？蓨A持在工件上。

16、The workpiece is already on the lathe.
工件已經上了車床。

17、This paper advances a new method to machine regular hexagon workpiece by lathe.
本文提出了一種在車床上加工正六邊形工件的新方法。

18、The hardness of the rubber contact wheel, the grinding depth of the workpiece per feed once.
探討橡膠接觸輪硬度、每次進給的磨削深度、磨削力和砂帶磨損對工件表面粗糙度的影響。

19、The effect of sliding block feed on the workpiece quality and rolling roller life is analyzed.
針對精密冷輾機的工作特點，分析了冷輾擴過程中滑塊進給對工件質量及芯輥受力的影響。

20、During machining, ultrasonic vibration of workpiece can improve the machining process.
在加工過程中，通過超聲波振動，工件加工工藝得到改善。

21、The sampled data of a workpiece to be measured is obtained on a universal tool micr…
在萬能工具顯微鏡上獲得了采樣數據，給出了計算結果。

22、DELTA also includes a gooseneck lamp to help get a clear view of the workpiece and grinding wheels.
三角洲還包括鵝頸燈，以幫助得到一個清晰的工件和砂輪。

23、The Discussion on Compton Scattering for Workpiece Inspection
利用Compton散射進行工件檢測的探討

24、Solar cells supply the energy for this workpiece detector.
太陽能電池為工件探測器提供能源。

25、A great variety of workpiece may be produced without resorting to a machining operation.
很多種類的工件可能不用選擇機加工操作就可以做出來。

26、adjustable jaws center workpiece in a lathe or center tool in a drill
在車床或鉆孔機中心工具內的可調整中心工件。

27、This workpiece is no more elastic than that one.
這個工件不比那個工件更有彈性。

28、Drilling: refers to the use of drilling or milling machine drill hole of the workpiece process.
鉆孔：指在鉆床或銑床上使用鉆頭對工件進行打孔的工藝過程。

29、A vectorization system for workpiece drawing images is presented in this paper.
介紹了一個工件圖紙自動輸入的矢量化系統。

30、This workpiece is not more elastic thant that one.
這個工件不比那個工件更有彈性。

workpiece翻譯