1、Design of Trapezoid Spline Hob and Its Addendum Arc
梯形花鍵滾刀及其齒頂圓弧的設計

2、The binding technique for hob cutter inserts is useful for small and middle tool works.
其中，關于滾刀刀片的粘結工藝對中小工具廠家有借鑒意義。

3、She raised such hob with her questions that the meeting broke up.
她拼命提出各種問題使會議流產了。

4、It is a biased book that raised / played hob with historical facts
這是一本任意歪曲歷史事實的有偏見的書。

5、He turned from the tray, lifted the kettle off the hob and set it sideways on the fire.
他把視線從托盤移開，取下爐架上的開水壺，將它側著坐在爐火上。

6、Hob is not a bad fellow on the whole.
霍布，總的來看，并不是一個壞人。

7、In this paper, a method of optimum profile design of cylindrical grinding gear hob is given.
本文提出了圓磨齒輪滾刀的優化造形法。該方法使圓磨滾刀的造形精度得到明顯提高。

8、Section Calculation of Sprocket Hob Grinding Abrasive Wheel
鏈輪滾刀鏟磨砂輪截形的計算

9、Vertical outline hob can not grind accurately.
直廓滾刀無法精確鏟磨。

10、Research on CAD System of Rectangular Spline Hob Design
矩形花鍵滾刀設計CAD系統研究

11、The ring teeth hob can realize high efficient radialfeedhobbing.
環紋滾刀可以實現高效率的徑向進給滾齒加工。

12、The relations between the various para meters of hob profile have been derivated.
推導了計算滾刀齒形的各參數之間的相互關系；

13、Hob does poorly in fishing but as a carpenter he is a ball of fire
霍布釣魚不行，但作為木工，他可是個能工巧匠。

14、Do you notice the hob - and - nob character of their friendship?
你注意到他們之間親密的友誼嗎？

15、Hob and nob, Doctor, which do you choose, white or red?
一起干一杯，醫生，白酒還是紅酒？

16、I know Hob won't believe this, but it's true.
我知道霍布是不會相信這一點的，但這是千真萬確的。

17、Formation Error of Archimedes Gear Hob and Its Correction
阿基米德齒輪滾刀的造形誤差及修正

18、This was placed next to the oven and hob for easy access.
這在容易進入的烤箱和滾刀旁邊被安置了。

19、He works in your industry and you'll have to hob knob, not just knob rub.
他在你的企業里工作，你準會平添麻煩，而不僅僅是傷人感情。

20、"Have another glass?" "With you, hob and nob," returned the sergeant.
“再來一杯嗎？”“遵命，彼此干一杯，”伍長回答說。

21、Hob will keep interrupting the lessons to tell his funny stories.
霍布總要打斷講課，來講他那些希奇古怪的故事。

22、Optimization Design of Non-involute Gear Hob Theory Tooth Arc Fit
非漸開線齒輪滾刀理論齒形圓弧擬合的最優化設計

23、Thus it direct realizes hob manufacture.
從而直接實現滾削加工。

24、Design and cutting condition of carbide hob with radial negative front Angle were discussed.
論述了徑向負前角硬質合金滾刀的設計及切削條件。

hob翻譯

n. 滾刀, 鐵架, 捉弄人的精靈【機】 滾齒刀 詳情